pipeflow3D 管道流量及压力模拟计算小软件

mechen

pipeflow3D 管道流量及压力模拟计算小软件，好用win7 64bit 可用。

Pipe Flow 3D is a professional tool that calculates pressure losses in single supply pipe work systems where the flows are already known. The user must set the flows and then Pipe Flow 3D will analyse the pressure drops in the system. It can help you to: Calculate the fluid friction pressure loss in individual pipes. Calculate the overall system pressure drop. Check the full flow rate will reach the pump. Check the NPSH available. A comprehensive Fluid Database is included with viscosity and density of common fluids.

The Pipe Work System can be designed by drawing on the ?D?grid. Each pipe is drawn by dragging the mouse from the previous pipe position, to a new grid intersection, and clicking to confirm the new pipe position. Options are provided to add supply container, pump and discharge container(s). Branch lines can be added as needed, each branch line ends with either another container or an open outlet. The pressure loss data for each pipe is calculated as each pipe is drawn. The material and size of each pipe is drawn using the default drawing size / flow chosen by the user. Once the system drawing has been completed, the length, diameter, flow rate and direction of any pipe can be changed as required. New pipes can be inserted into the system, or pipes may be deleted from the system.

PipeFlow 3D makes Pressure Drop Calculations easy. The fluid velocity, viscosity and density is used to calculate the Reynold抯 number. The roughness of the inside of the pipe and the internal pipe diameter is used to calculate the 憆elative roughness?of the pipe. The Reynold抯 number and 憆elative roughness?are used to establish the friction factor and the flow type. The pipe friction loss is displayed in either m head (or ft. head). The friction loss due to pipework fittings is also displayed. The pipe friction loss, the effect of any rise or fall, the friction loss due to pipework fittings, and any fixed pressure together with the fluid density is used to calculate the total pressure drop. The total pressure drop is displayed in either bar, kPa, or psi. By moving the cursor to any pipe joint node the data for that selected pipe can be displayed.

pipeflow3D 管道流量及压力模拟计算小软件.rar (1.25 MB, 下载次数: 47, 售价: 5 米粒)

2013-10-1 08:08 上传

点击文件名下载附件

liuyu1029

谢谢分享谢谢分享   

55AA

这个在一个QQ群有出售中文版的，好像大概30几块！但和PIPENET性质差不多！

阿谢克那·李

楼上的消息灵通，用过如何？

wodeai72727

多谢分享，好东西啊！！！

Sharjah

软件看上去不错噢，现在用不上，暂时先收藏了。看看再说。

plaque

多谢分享，好东西啊！！！

niuwa

多谢分享，好东西啊！！！

z8212020

谢谢分享谢谢分享

hh88

好资料，谢谢分享。