|
|
发表于 2017-6-9 08:11:06
|
显示全部楼层
我查阅了ASME 第二卷A篇2015版本, A370,英文版本描述如下:
8.5.1 Standard Rectangular Tension Test Specimens — These forms of specimens are shown in Fig. 3. To determine the cross-sectional area, the center width dimension shall be measured to the nearest 0.005 in. (0.13mm) for the 8 in. (200 mm) gage length specimen and 0.001 in. (0.025 mm) for the 2 in. (50 mm) gage length specimen in Fig. 3.
你问的应该是红色字体部分,英文中的意思是你测量8in宽度的试样,测量的数值应该转化成最靠近的0.005in精度的数值。
由于ASME是美国标准,单位是以美标为准,测量的试样宽度数值的精度为0.005in,即转化的国际单位为0.13mm。
比如你测量的是8.004in,你记录的数值应该为8.005in。
比如你测量的是8.002in,你记录的数值应该为8.000in。
个人的看法,欢迎一起探讨 |
|
|