|
|
发表于 2017-4-4 13:50:23
|
显示全部楼层
ASME 压力容器器壁钻在役监测用小孔设计问题:
见 2015 ASME BPVC Section Ⅷ,Division 1:Subsection A General Requirements
Part UG General Requirements for All Methods of Construction and All Materials
UG-25 Corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
(e) Telltale Holes. Telltale holes may be used to providesome positive indication when the thickness has been reduced to a dangerous degree. Telltale holes shall not be used in vessels that are to contain lethal substances [see UW-2(a)], except as permitted by ULW-76 for vent holes in layered construction. When telltale holes are provided, they shall have a diameter of 1/16 in. to 3/16 in. (1.5 mm to 5 mm)and have a depth not less than 80% of the thickness required for a seamless shell of like dimensions. These holes shall be provided in the opposite surface to that where deterioration is expected. [For telltale holes in clad or lined vessels, see UCL-25(b).]
|
评分1
-
查看全部评分
|
|