|
|
发表于 2013-3-28 23:49:18
|
显示全部楼层
本帖最后由 lyklzy 于 2013-3-28 23:51 编辑
SA-435/SA-435M SPECIFICATION FOR STRAIGHT-BEAM ULTRASONIC
EXAMINATION OF STEEL PLATES
1. Scope
1.1 This specification covers the procedure and acceptance standards for straight-beam, pulse-echo, ultrasonic examination of rolled fully killed carbon and alloy steel plates, 1⁄2 in. [12.5 mm] and over in thickness. It was developed to assure delivery of steel plates free of gross internal discontinuities such as pipe, ruptures, or laminations and is to be used whenever the inquiry, contract, order, or specification states that the plates are to be subjected to ultrasonic examination.
SA-578/SA-578M SPECIFICATION FOR STRAIGHT-BEAM ULTRASONIC EXAMINATION
OF ROLLED STEEL PLATES FOR SPECIAL APPLICATIONS
1. Scope
1.1 This specification covers the procedure and acceptance standards for straight-beam, pulse-echo, ultrasonic examination of rolled carbon and alloy steel plates, 3⁄8 in. [10 mm] in thickness and over, for special applications. The method will detect internal discontinuities parallel to the rolled surfaces. Three levels of acceptance standards are provided. Supplementary requirements are provided for alternative procedures
|
评分1
-
查看全部评分
|
|