|
|
发表于 2013-2-4 10:21:31
|
显示全部楼层
本帖最后由 lyklzy 于 2013-2-4 10:58 编辑
SB-209 A 1060 Temper HO:
见 SB-209 SPECIFICATION FOR ALUMINUM AND ALUMINUMALLOY SHEET AND PLATE 中:
1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M).
在 ANSI H35.1/H35.1(M) 中:
4.1 Basic Temper Designations
O annealed. Applies to wrought products that are annealed to obtain the lowest strength temper, and to cast products
that are annealed to improve ductility and dimensional stability. The O may be followed by a digit other than zero.
H strain-hardened (wrought products only). Applies to products that have their strength increased by strain-hardening,
with or without supplementary thermal treatments to produce some reduction in strength. The H is always followed by two
or more digits.
|
评分1
-
查看全部评分
|
|