|
|
发表于 2013-2-21 16:32:19
|
显示全部楼层
本帖最后由 lyklzy 于 2013-2-21 16:46 编辑
你们公司去年取了 ASME S 证书,怎么现在又想起来要取 A 证书呢?
请先查看一下你们获得的 ASME 证书上 SCOPE 一项的内容是什么,学习 ASME BPVC Section I,
PG-107, 108 , 109,对照下面情况, 再考虑是否要取 A 证的必要性。
NONMANDATORY APPENDIX A
Table A-370
Guide to Information Appearing on Certificate of Authorization
(3)This entry describes the scope and limitations, if any, on use of the Certification Mark and Designator,
as illustrated by the following examples
Certification Mark with “S” Designator
- Manufacture and assembly of power boilers at the above location.(工业锅炉厂)
- Manufacture and assembly of power boilers at the above location and field sites controlled by the
above location. (电站锅炉制造厂)
- Design and assembly of power boilers with fabrication subcontracted to holders of appropriate
Certificates of Authorization and field assembly at field sites controlled by the above location.(工程公司)
- Design of power boilers with responsibility for compiling Code certification and for stamping the boiler.
Fabrication and assembly subcontracted to holders of appropriate Certificates of Authorization.(设计院总承包)
- Manufacture of boiler parts at the above location.(锅炉部件制造厂)
- Manufacture of boiler parts at the above location and field sites controlled by the above location.(锅炉部件制造厂)
- Manufacture of boiler parts at field sites controlled by the above location.(锅炉部件制造厂)
Certification Mark with the “A” Designator
- Assembly of Power Boilers at field sites controlled by the above location.(电力建设公司)
|
评分1
-
草地飞龙
| + 8 |
帮助他人解决问题,新时期的活雷锋! |
查看全部评分
|
|