|
|
asme 9卷 QW-451.1规定了评定弯曲试件,然后note 2说 (2) For combination of welding procedures, see QW-200.4.,但是QW-200.4里面压根没找到关于弯曲试验的内容。然后QW-200.2里面定了个原则:One or more combinations of welding processes, filler metal, and other variables may be used when welding a test coupon. The approximate thickness of weld metal deposited, excluding weld reinforcement, shall be recorded for each set of essential and, when required, supplementary essential variables. Weld metal deposited using each set of variables shall be included in the tension, bend, toughness, and other mechanical test specimens that are required.
请问大家怎么理解,是note 2搞错了吗,应该是see QW-200.4? 另加入组合是GTAW+SMAW 16mm,怎么选弯曲方式。 GTAW+SMAW+SAW,怎么选弯曲方式?
|
评分1
-
查看全部评分
|
|