|
|
发表于 2012-9-3 10:12:48
|
显示全部楼层
如果热影响区不需要冲击的话,那么可以焊PNo相同的各自母材,请参考一下资料(欢迎各位提出意见,交流)
QW-403.5 Welding procedure specifications shall be
qualified using one of the following:
(a) the same base metal (including type or grade) to be
used in production welding
(b) for ferrous materials, a base metal listed in the same
P-Number Group Number in table QW/QB-422 as the base
metal to be used in production welding
(c) for nonferrous materials, a base metal listed with
the same P-Number UNS Number in table QW/QB-422
as the base metal to be used in production welding
For ferrous materials in table QW/QB-422, a procedure
qualification shall be made for each P-Number Group Number
combination of base metals, even though procedure
qualification tests have been made for each of the two
base metals welded to itself. If, however, two or more
qualification records have the same essential and supplementary
essential variables, except that the base metals
are assigned to different Group Numbers within the same
P-Number, then the combination of base metals is also
qualified. In addition, when base metals of two different
P-Number Group Number combinations are qualified using
a single test coupon, that coupon qualifies the welding of
those two P-Number Group Numbers to themselves as well
as to each other using the variables qualified.
This variable does not apply when impact testing of the
heat-affected zone is not required by other Sections. |
评分1
-
Es前缘
| + 5 |
THANKS FOR YOUR SUPPORT! |
查看全部评分
|
|