本帖最后由 Self-reliance 于 2015-12-5 18:57 编辑
Delcam PowerSHAPE 2016 SP3 Update with Documentation
Delcam PowerSHAPE 2016 SP3 Update with Documentation | 679.5 mb
One of the world's leading suppliers of advanced CAD/CAM solutions, Delcam, has released update of PowerSHAPE 2016 Pro CAD for CAM system, for modelling, manufacture and reverse engineering. The new release includes improvements in direct modelling, surface modelling and reverse engineering, plus support for data from Creaform HandySCAN hand-held scanners.
PowerSHAPE Pro has often been lauded for the strengths it has always had on its surface-modelling capabilities. These capabilities have been further improved with new dynamic point editing. Multiple points, either along a single curve or picked from multiple curves, can now be selected and moved, with real-time updating of the model. This makes styling of free-form shapes easier and quicker, and also speeds up modelling for manufacture tasks like removing undercuts from tooling designs.
PowerSHAPE Pro has also been made faster and easier in the ability to morph complete models into a new shape. One key application for this option is in compensating for springback in press tools or warpage in moulded products. The user can alter CAD directly based on scan data from a sample part collected as a point cloud or as a triangle mesh, with a choice between either updating the CAD model of the part to match the as-produced item or adjusting the tooling design so that it can produce parts matching the original CAD data.
Another important application of morphing is in updating parts that need to be repaired but that have changed their shape during use. A typical example is turbine blades that have been distorted by heat so that their shape no longer matches the CAD data used for their manufacture. Again, the original CAD data can be adjusted to match scan data captured from the actual part.
The main enhancement to PowerSHAPE Pro’s reverse engineering functionality is a more automated method for capturing cross-sections through a mesh. The software now fits lines and fillets to the cross-section where it can, with the user able to control the tolerance used. This method uses the mesh as a guide instead of treating it as exact geometry with the priority of capturing the design intent rather than ensuring a precise fit to the scan data.
About Delcam plc
Delcam is a world-leading developer and supplier of advanced CADCAM software, with more than 35,000 customers in over 80 countries. These clients vary from global names like Nike, Boeing and Mattel to small start-ups and individual craftsmen. Founded 30 years ago, we are the largest developer of product development software in the UK, with subsidiaries in Europe, America and Asia. Our global success has been recognised with many awards, including three Queen’s Awards for Enterprise in the last six years.
Name: Delcam PowerSHAPE
Version: (64bit) 2016 SP3 with Documentation
Home: www.delcam.com
Interface: multilanguage
OS: Windows 7even / 8
System Requirements: Delcam PowerShape 2016
Size: 679.5 mb
Delcam_PowerShape_2016_SP3_Update-SSQ.part04.rar
(2 MB, 下载次数: 8, 售价: 5 米粒)
为避免管理成员和VIP会不付米粒无限下载个人资料，请于购买(十个附件= 300米粒)后请将讯息寄送至个人信箱(mechen002991@gmial.com)即行寄送，敬请配合反制这些人的滥权。 | 
窥视卡
雷达卡
发表于 2015-12-5 09:33:49
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2015-12-5 10:43:15
发表于 2015-12-5 11:15:53
发表于 2015-12-5 20:36:22
