|
|
An Overview of The Recurrent Failures of Duplex Stainless Steels 2019
Cesar Roberto de Farias Azevedoa,⁎, Henrique Boschetti Pereirab, Stephan Wolyneca,
Angelo Fernando Padilhaa
a Department of Metallurgical and Materials Engineering, Escola Politécnica, Universidade de São Paulo, Brazil
b Laboratory for Corrosion and Protection, Institute for Technological Research of the State of São Paulo, Brazil
A B S T R A C T
The favourable combination of mechanical and corrosion properties of ferritic-austenitic duplex stainless steels (DSSs) makes this class of materials
widely employed in many industries (e.g. petrochemical, nuclear, pulp and paper). Despite their wide and growing usage, the DSS components
might be subjected to various types of mechanical and environmentally induced failures during their life cycle, especially when the component is
exposed to temperatures in the range of 300 to 900 °C, which might promote the precipitation of stable and deleterious phases. For instance, the
precipitation of sigma, alpha-prime and M23C6 phases - the latter more often observed in high carbon DSS – might induce the premature failure of
DSS components due to the mechanical embrittlement and the sensitization of the microstructure during thermal exposure (either in processing,
such as welding, or in service). Additionally, the ferrite phase features a ductile-to-brittle temperature, which defines the lower service temperature
of DSS components. In this sense, the main properties of DSSs will be compared with the properties of austenitic stainless steels (ASSs) and ferritic
stainless steels (FSSs) to provide the reader a broader view about boundary conditions for the selection and use of DSSs. The main phase transformations
and microstructures of the DSSs will be concisely presented and microstructural, fractographic and crack propagation characterization of
selected in-service failures will illustrate the role of these stable and deleterious phases on the life of DSS components.
|
|
|