|
ANSYS Electromagnetics Suite 16.2 ANSYS Electromagnetics Suite 16.2 | 3.0 Gb
ANSYS Inc. announced the availability of its leading provider ofelectromagnetic simulation software, ANSYS Electromagnetics 16.2, contains bothgeneral purpose and application specific products to address a broad array ofindustry applications. These solutions allow you to accurately simulateelectromagnetic fields when predicting the behaviour of electrical andelectromechanical devices.
ANSYS enhanced the depth and breadth of its electromagnetic field solutionswhen it incorporated the industry-leading electromagnetic field solvers fromAnsoft into the portfolio. These products cover the full spectrum of electromagneticanalysis and design. ANSYS electromagnetic solutions enable users to leveragebest-in-class software technology to predict the behavior of electrical andelectromechanical devices, eliminate prototype iterations, and deliver productsto market faster.
file:///E:/TEMP/msohtmlclip1/01/clip_image002.gif16.2:Summary of Enhancements and Defect Corrections This combined installation includes the following applications:
- ANSYS Electronics Desktop 2015.2 (HFSS, HFSS 3D Layout, HFSS-IE, 2DExtractor, Q3D Extractor)
- Ansys Electromagnetics 16.2 Modeler Files for CATIAV5
- Ansys Electromagnetics ECAD Translators 2015.2
- Ansys Electromagnetics PExprt 2015.2
- ANSYS Maxwell 2015.2
- ANSYS Simplorer 2015.2
- ANSYS SIwave 2015.2
16.2: Summary of Enhancements and Defect Corrections
Circuit
- US102582 Users can create configuration files that modify existing menus andadd their own custom menu commands.
- US108694 Take samples per bit and bits per block in AMI simulations.
- DE99634 Users can now set Reciprocal option when analyzing subcircuits.
- DE99746 Users can run Paste script command with empty clipboard.
- DE99765 Users can paste designs to create dynamic links after pasting CircuitDesigns.
- DE100894 Users can run script to open files in restricted folders without adialog popping up.
- DE100905 Workbench scripts calling CreateWBDynamicLinks() will create linksto all appropriate designs.
- DE101915 Users can now run simulations in remote machine when Touchstone fileis located in the local machine.
- DE102707 Delay time in eye source is handled properly during quick eyeanalysis.
- DE103031 Users can set TRL Option for dynamic links when pasting or draggingand dropping an HFSS design into a Circuit Design by
holding down the CTRL key.
- DE103038 Users can netlist and analyze AMI devices using the new die_sidenodes.
- DE103540 Users can select multiple ports in schematic and edit one of themwithout affecting the others.
- DE104946 Users can rename designs to have the same names as ordinarycomponents.
- DE105177 Using Tune mode on Nexxim design is much faster.
- DE105328 Changing ReHarmNum in TV Noise Analysis produces valid results.
- DE105928 Users can delete unused project definitions from Definition Librarydialog.
- DE107559 C-model support in Nexxim is enabled if third-party binaries (andACLBs and ASLBs) are present in AEDT installation folder.
Core
- US99470 It is possible to export only selected parts with Modeler/Export. Itis supported for following file formats: IGES, STEP, ACIS,
Parasolid, DXF and CATIA V4 files.
- US107479 Batch solves can now be performed on archived projects.
- US108210 Additional Desktop and GUI License Fallbacks for 16.2.
- DE81463 Data resampled is based on the true distribution.
- DE99292 Fixed update issue with non-geometry parameters of component whenthat parameter is assigned to design or project variable.
- DE100565 Fixed crash with code changes.
- DE101119 Fixed scaling issue with Modeler/Export when modeler unit is not mm.
- DE101438 Animation file is now correctly exported from remote desktop.
- DE102123 Fixed crash with auto healing for certain geometry configurations.
- DE102022 Image files are now correctly copied/exported from remote desktop toWindows 8.1.
- DE103229 Disabling limit line violation functionality in 16.2 on Linux.
- DE103841 Messages with "goto" information for 3D geometry nowhighlight object as expected when double-clicked.
- DE105967 Delays of several seconds every few minutes no longer occur in Maxwell.
- DE106070 Product path for job submission now works correctly on Linux forcases where there is a '.' in the path.
ECAD Translators
- DE98481 Unsupported pad definitions with unit overrides no longer prevent theimport of ODB++ designs.
- DE101170 Preliminary ODB++ v.8 support provided for extended unitdefinitions. Note: v.7x export is still preferred.
- DE101781 Intermittent crash no longer occurs when flattening designs duringGDSII import.
HFSS
- DE97621 The solver now correctly issues singular matrix error instead ofout-of-memory error.
- DE98245 The current plot for a user-defined current source is now correctlydisplayed for the implicit transient solver.
- DE100632 Clean stop no longer crashes for the implicit solver as it could dofor some rare cases in 16.1.
- DE100879 The DDM solver failure has been fixed.
- DE101012 Setting proper permissions for MPI processes on a cluster.
- DE101428 The implicit transient solver now produces the correct answers uponrestarting after a clean stop.
- DE101504 The incorrect out-of-memory criteria has been modified for hybridsolver thus avoiding issuing the out-of-memory when enough
memory exists.
- DE101536 MLFMM solutions for small flat objects are now accurate.
- DE102681 The occasional slowdown of the solver has been fixed and it is nowexpected to provide minor to significant speedup vs HFSS
2014.
- DE102786 Change in the export format of fields.
- DE102955 Error in push excitations for modal.
- DE103285 Restarting the implicit solver after a clean stop for a design withfrequency dependent material now continues at the clean
stop time as opposed to time zero.
- DE103617 The auto HPC mode for the hybrid solver has improved the algorithmwhen to distribute vs solving sequentially such that it
better takes into account the available memory.
- DE103797 Parametric batch solve no longer fails on Windows HPC with automaticjob distribution settings.
- DE103903 Finite array solver no longer hangs for very large arrays.
- DE104424 The implicit solver now successfully completes the simulation forthe case of a mix of passive ports and active non-port
sources.
HFSS 3D Layout
- DE101352 No longer crashes when negative offset collapses polygon in expandfunction.
- DE101989 Fixed return type and value for Edb API GetReferenceTerminal andGetGeometries.
- DE102075 Under certain circumstances, the pad-suppression test returnedincorrect results; this has now been fixed.
- DE102327 Backdrill start/end layer is updated during parametric sweep.
- DE102764 HFSS 3D Layout custom setup now works with fast setting.
- DE104943 Sources are assigned to correct terminal in HFSS 3D Layout fieldspost-processing.
- DE105503 PEC and RLC boundaries are created correctly when importing fromEDB.
- DE106854 GDI leaks resulting from Save and context switches between designshave been fixed.
- DE108631 Circuit elements are now included during adaptive refinement whenusing the distributed direct matrix solver.
Maxwell
- US107290 For Maxwell 3D, the induced voltage at t=0 is no longer zero,instead by linear interpolation.
- US107292 For Maxwell 2D, the induced voltage at t=0 is no longer zero,instead by linear interpolation.
- DE98450 The m3dfs_qs_solve license feature now borrows the correct feature.
- DE101914 Fixed the convergency issue of nonlinear impedance boundary.
- DE102149 The unassigned conductors are no longer treated as short circuit.
- DE104298 Analysis window settings for harmonic forces can be parametrized.
- DE105872 Addressed an issue related to loss density mapping for multi-physicscoupling (should be loss density mapping, not lossmapping
at each element).
- DE107508 Calling solver directly for Fluent coupling UDF now works on Linux.
Q3D Extractor
- DE95680/DE99815 Correct error message is displayed when the capacitancesolver in Q3D runs out of memory.
- DE98908 Corrected a problem with the error calculation for the adaptive AC RLsolver in TPA. The new method is consistent with Q3D and
resolves the convergence issues.
- DE101200 Q3D Extractor now supports curved surface with thin conductorboundary.
- DE102149 For 2D Extractor, the unassigned conductors are no longer treated asshort circuit.
Simplorer
- US108660 FMI 2.0 is fully supported in the GUI and solver.
- DE98483 Voltage dependency of C0_SB, VDIFF_SB are now addressed.
- DE98486 The voltage ringing frequency caused by inductance of path and outputcapacitance is now taken into consideration for Cds
computation in NMOS6.
- DE100283 Fixed an issue with PSPICE translation for the floor and ceilfunctions.
- DE100284 Fixed an issue with PSPICE PWRS(x,y), when x < 0.
- DE102117 Fixed an error affecting some VDA library elements in VHDL-AMSexport.
- DE102594 Fixed import error when there is a line break (empty line) in amulti-line statement in SPICE netlist.
- DE103001 Product documentation now includes information about the differenttrace types available when editing trace attributes.
- DE103487 Supports TABLE lookup in Controlled Current sources for PSPICEmodels.
- DE103867 Substrate pin is automatically added when C*S parameter is used inPSPICE model.
- DE105196 Corrected documentation for temperature coefficient calculation forthe dynamic diode model.
SIwave
- US107847 New port models for SIwave PSI simulations.
- DE88035/DE104740 Addresses an isolated crash when running Sentinel-PSIsimulations on designs where ports are connected to bondwires.
- DE99452 Fixed an issue when two pads are defined at the same location.
- DE99899 Fixed an issue in the distributed SYZ simulation using Intel MPI andinterpolating sweep.
- DE99666 Addressed an issue determining reference points for n-portS-parameter blocks connected to pins sitting on top of/below cutouts
in metal planes.
- DE100804 Addressed a simulation failure for SIwave projects that referenceSPICE netlists containing mutual inductance (K) elements.
- DE103348 Fixed an issue during simulation concerning K-element (mutualinductor) handling in SPICE netlists attached to SIwave designs.
- DE100982 Fixed an issue wherein only major (for example, 2015.0) AEDTreleases were being found by SIwave when instantiating HFSS/Q3D
projects.
- DE100158/DE102808 Fixed a problem with coupled net inclusion as a function ofthe coupling distance in TPA simulations.
- DE101106 Resolved an issue with runtime dependent s-parameters when Q3D-DDMis enabled.
- DE101630 Addressed an electrical short problem that occasionally occurred forclose-by rectangular shaped pads.
- DE101944/DE100434 Fixed an issue wherein bondwires placed on the bottom ofpackage designs were occasionally colliding with the infinite
ground plane, resulting in a solver failure.
- DE102330 Changes required to synchronize standalone Sentinel-PSI with PSIsolver option in SIwave.
- DE104327 Fixed an issue with trapezoidal conductor cross sections.
- DE105662 Changes required to make the SIwave R16.2 scripting interface unique(that is, to not conflict with R16.0/R16.1).
- DE106713 Fixed a problem in which Sentinel-PSI simulation results wereshowing an open circuit at DC for a well-connected signal net.
- DE106976 Addressed an issue in which an incorrect trace description was beingpassed from SIwave when exporting a design to HFSS 3D
About ANSYS, Inc.
ANSYS brings clarity and insight to customers' most complex design challengesthrough fast, accurate and reliable engineering simulation. Our technologyenables organizations ? no matter their industry ? to predict with confidencethat their products will thrive in the real world. Customers trust our softwareto help ensure product integrity and drive business success through innovation.Founded in 1970, ANSYS employs over 2700 professionals, many of them expert inengineering fields such as finite element analysis, computational fluiddynamics, electronics and electromagnetics, embedded software, systemsimulation and design optimization. Headquartered south of Pittsburgh, U.S.A.,ANSYS has more than 75 strategic sales locations throughout the world with anetwork of channel partners in 40+ countries.
Name: ANSYS Electromagnetics
Version: (64bit) 16.2 Suite
Home: www.ansys.com
Interface: english
OS: Windows XP / Vista / 7even / 8 / 8.1
Size: 3.0 Gb
| 
窥视卡
雷达卡
发表于 2015-8-17 09:58:59
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2015-8-20 20:26:34
发表于 2015-9-4 15:41:51
发表于 2017-3-2 23:14:29
发表于 2017-3-3 00:11:06
