Delcam PowerInspect 2014 SPO

Red-Bean · 发表于 2015-1-3 07:22:07

Delcam PowerInspect 2014 SPO

Delcam, one of the world's leading suppliers of advanced CAD/CAM, hasreleased PowerInspect 2014, a world-leading inspection software for all typesof device.

The latest release of Delcam’s PowerINSPECT inspection software has a newinterface with new icons that make the software more intuitive and even easierto use. Other enhancements in the new version include the ability to createcompound items, and so speed up and simplify repetitive measurements,enhancements to the measurement dialogs and a further increase in the range ofgeometric features that can be inspected.

The new interface was developed to further improve the ease of use that hasbeen central to PowerINSPECT becoming the world’s leading hardware-independentinspection software. Over the last few releases, the software has seen asignificant increase in the range of measurements that it can make. Thesoftware can now be used to take all types of simple measurements and toinspect a growing variety of geometric features, as well as offering more toolsfor analysing complex 3D surfaces. In addition to making it easier to negotiatethe greater range of options, the new interface features freshly-designedicons, which give a cleaner look and feel to the software.

In addition, PowerINSPECT now has the ability for users to create customtoolbars, which allow frequently-used commands to be grouped together in oneconvenient place, and so improve speed and ease of use. It is possible toexport and import toolbars, so users can easily transfer their set-up to adifferent PC or share their toolbars with other operators.

During inspection, 2D features (circles, slots, rectangles and the like) arealways projected to a reference plane. For example, when inspecting a circlerepresenting the top of a cylinder, the user will want to measure theproperties of the circle and its height. PowerINSPECT can now create a compounditem that combines the plane and the feature together into a single compoundfeature, and assumes that the 2D feature is to be reported, while the plane isnot. This leads to a shorter sequence tree that is easier to navigate and areport that shows only the properties of the 2D features by default.

This option is especially valuable for any iterative building operation, wherean assembly needs to be measured, adjusted and re-measured until the resultsare acceptable. Using compound features makes it much quicker and easier to goback and forth between measurements. In particular, if the plane needs to bere-measured to determine the height of the circle, rather than the xy position,it can be re-measured immediately. This new functionality was primarilydesigned for the building and calibration of fixtures but it is useful in anyscenario where the user has to re-measure and adjust features within anassembly.

Enhancements to the measurement dialogs in PowerINSPECT allow a wider range ofinformation to be shown in addition to the measured values. The user can nowalso choose to display nominal, deviation and error values, helping to highlightimmediately whether each measured feature is in tolerance. This provides theoperator with more complete information, allowing even faster decisions aboutthe status of the part and whether to continue with, or to end, the measurementroutine.

The range of geometric features that can be measured with PowerINSPECTcontinues to be increased with a new option to create a probed ellipse. A newconstructed geometric feature allows the user to create the circle at theintersection of two tori. This can then be used to locate the transition pointin ‘S’ bends in tubing and ductwork applications. In addition, enhancementshave been made to the measurement of a constructed ellipse.

Improved calibration records can now be recorded in the probe database. Thisallows better traceability of the data and provides more assistance for theuser to manage their calibrations.

Finally, PowerINSPECT now includes improved support for the Renishaw PH20probe. This probe is becoming more popular as the five-axis motion of the PH20does not require calibration of every stylus angle and allows measurementpoints to be taken by moving only the head rather than the complete CMMstructure, so maintaining accuracy at higher measuring speeds.

About Delcam plc

Delcam is a world-leading developer and supplier of advanced CADCAM software,with more than 35,000 customers in over 80 countries. These clients vary fromglobal names like Nike, Boeing and Mattel to small start-ups and individualcraftsmen. Founded 30 years ago, we are the largest developer of productdevelopment software in the UK, with subsidiaries in Europe, America and Asia.Our global success has been recognised with many awards, including threeQueen’s Awards for Enterprise in the last six years.

Name: Delcam PowerInspect
Version: 2014 SP0 build 14.1.0.01152026
Home: www.powerinspect.com
Interface: multilanguage
OS: Windows XP / Vista / Seven / 8
Size: 1.0 Gb

迅雷BT种子.torrent (20.16 KB, 下载次数: 1, 售价: 10 米粒)