|
PIPENET管网流体分析软件起源于七十年代的剑桥大学。1979年，剑桥大学计算机中心将其收购并命名为PIPENET，1985年SUNRISESYSTEMSLIMITED公司成立，独立进行PIPENET软件的研发和拓展。PIPENET系列软件具有广泛的工业用途，具备强大的工程管网系统的数值计算、模拟仿真和系统优化等功能。能够使工程管网系统的设计更科学、更合理、更经济、更安全；同时有效地提高设计效率、增加工程收益、降低事故发生率。 1. PIPENET系列产品功能简述 PIPENET系列产品包括标准模块、消防模块以及瞬态模块，其中每个模块都是独立运行的软件。 1.1 标准模块：PIPENET标准模块用于工业管网稳态设计的数值计算及模拟仿真。其具体功能包括：管径选型；泵、阀、孔板等设备选型；流场计算（系统各部件的压力、压损、流量、流速等）；异常工况（堵、漏等）的模拟；系统圆整优化；便捷的数据读入和输出等。 1.2 消防模块：PIPENET消防模块用于消防管网稳态设计的数值计算及模拟仿真，遵循国际公认和常用的各种消防规范（如NFPA美国消防规范、FOC英联邦国家消防规范、GB国标消防规范等），并符合上述规范对各行业消防系统设计的严格而特殊的各种强制性计算和布置要求，同时生成国际通用的NFPA格式的消防计算书。 1.3 瞬态模块：PIPENET瞬态模块用于工业管网和消防管网的动态分析、模拟仿真和数值计算。其具体功能包括：水锤（汽锤）分析、管道振动分析、动态力的数值计算、泵阀的启停设计、控制系统的动态响应模拟、关键设备（安全阀、蓄能器、真空破坏阀、箱体等等）的选型和动态响应模拟等等，并提供数值计算报告、动态力的计算数值输出、波形图的输出、编辑、比对等功能。
Sunrise PIPENET Vision 1.5.0.2722 | 179.1 mb
PIPENET is a powerful software tool for rapidflow analysis of pipe and duct networks. Three modules ensure that, no matterhow extensive or complex your network, PIPENET will perform.
About Sunrise Systems
Sunrise Systems is based in Cambridge, UK.Sunrise Systems has an office in Houston, Texas and a network of outstandingmarketing partners across the globe.
Why use PIPENET?
- PIPENET sets the standard – leads the way inflow analysis – the best!
- PIPENET starts at the design phase. Itperforms pipe sizing and pump selection calculations in the steady state. Fromthere it goes all the way to computing hydraulic loads for pipe stress analysisand support design, through several optional stages depending on exactly whatthe user requires.
- PIPENET has been in use across the globe forover 25 years, by companies large and small, including many multinationals, inthe oil and gas, process, fire protection, ship building, and power generationindustries.
- PIPENET is flexible, offers a wide selectionof units, user-defined pipe schedules, fittings libraries and pumpcharacteristics.
- PIPENET is constantly being updated andenhanced, putting us at the forefront of pipework and pipeline designtechnology.
- SUNRISE SYSTEMS is accredited with ISO 9001.
- PIPENET Spray/Sprinkler Module sets the globalstandard for the design of fire protection systems especially in the oil, gasand process plant industries - deluge, ringmain, sprinkler or foam concentratesystems.
- PIPENET Standard Module is the perfect toolfor solving general flow problems with liquids, gases or steam – in pipe andduct networks – cooling water systems, steam distribution systems, HVACsystems.
- PIPENET – What support will I get?
- PIPENET is supported by a rapid-response teambased in the UK, who will talk you through any difficulties you may have. Inaddition, PIPENET is supported by Authorised Marketing Partners and TrainingConsultants across the globe. We offer a cost effective maintenance, updatesand support programme which will keep you up to date, ensuring that you alwayshave the latest technology at your fingertips.
More info: www.sunrise-sys.com
Name: Sunrise PIPENET Vision
Version: 1.5.0.2722
Last Version: 1.5.1
Creator: www.sunrise-sys.com
Interface: english
OS: Windows XP / Vista / Seven
Size: 179.1 mb
Sunrise PIPENET Vision 1.5.0.2722.part1.rar(219MB)
Sunrise PIPENET Vision 1.5.0.2722.part2.rar
(3.46 MB, 下载次数: 29, 售价: 20 米粒)
PIPENET建议书.pdf
(188.6 KB, 下载次数: 6, 售价: 5 米粒)
PIPENET软件在工程项目中的应用案例.pdf
(2.19 MB, 下载次数: 23, 售价: 10 米粒)
| 
窥视卡
雷达卡
发表于 2014-10-27 10:49:00
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
发表于 2014-10-27 10:57:17
发表于 2014-10-27 11:45:51
发表于 2014-12-28 22:15:48
发表于 2014-12-28 22:36:24
发表于 2016-12-22 16:44:41
