ASTM A系列-2013 INDEX

mechen

A1-00(2010) Standard Specification for Carbon SteelTee Rails

A2-02(2008) Standard Specification for Carbon SteelGirder Rails of Plain, Grooved, and Guard Types

A3-01(2012) Standard Specification for Steel JointBars, Low, Medium, and High Carbon (Non-Heat-Treated)

A6/A6M-13 Standard Specification for GeneralRequirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling A20/A20M-11Standard Specification for General Requirements for Steel Plates for PressureVessels

A27/A27M-10 Standard Specificationfor Steel Castings, Carbon, for General Application

A29/A29M-12 Standard Specificationfor Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for A31-04(2009)Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

A34/A34M-06(2012) Standard Practicefor Sampling and Procurement Testing of Magnetic Materials

A36/A36M-12 Standard Specificationfor Carbon Structural Steel

A36/A36M-SP-12 EspecificaciónNormalizada para Acero al Carbono Estructural

A47/A47M-99(2009) StandardSpecification for Ferritic Malleable Iron Castings A48/A48M-03(2012)Standard Specification for Gray Iron Castings

A49-12 Standard Specification forHeat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and ForgedCarbon Steel Compromise Joint Bars

A53/A53M-12 Standard Specificationfor Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

A53/A53M-SP-12 EspecificaciónNormalizada para Tubos de Acero Negro e Inmersos en Caliente, Galvanizados,Soldados y Sin Costura

A65-07(2013) Standard Specificationfor Steel Track Spikes

A66-07(2013) Standard Specificationfor Steel Screw Spikes

A67-00(2010) Standard Specificationfor Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

A74-13 Standard Specification forCast Iron Soil Pipe and Fittings

A82/A82M-07 Standard Specificationfor Steel Wire, Plain, for Concrete Reinforcement

A82/A82M-SP-07 EspecificaciónNormalizada para Alambre de Acero, Liso, para Refuerzo de Concreto

A90/A90M-13 Standard Test Method forWeight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-AlloyCoatings A99-03(2009) Standard Specificationfor Ferromanganese

A100-07(2012) Standard Specificationfor Ferrosilicon

A101-04(2009) Standard Specificationfor Ferrochromium

A102-04(2009) Standard Specificationfor Ferrovanadium

A105/A105M-12 Standard Specificationfor Carbon Steel Forgings for Piping Applications

A106/A106M-11 Standard Specificationfor Seamless Carbon Steel Pipe for High-Temperature Service

A108-07 Standard Specification forSteel Bar, Carbon and Alloy, Cold-Finished

A109/A109M-08 Standard Specificationfor Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

A111-99a(2009) Standard Specificationfor Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire

A116-11 Standard Specification forMetallic-Coated, Steel Woven Wire Fence Fabric

A121-13 Standard Specification forMetallic-Coated Carbon Steel Barbed Wire

A123/A123M-12 Standard Specificationfor Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

A125-96(2007) Standard Specificationfor Steel Springs, Helical, Heat-Treated

A126-04(2009) Standard Specificationfor Gray Iron Castings for Valves, Flanges, and Pipe Fittings

A128/A128M-93(2012) StandardSpecification for Steel Castings, Austenitic Manganese

A131/A131M-08 Standard Specificationfor Structural Steel for Ships

A132-04(2009) Standard Specificationfor Ferromolybdenum

A134-96(2012) Standard Specificationfor Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

A135/A135M-09 Standard Specificationfor Electric-Resistance-Welded Steel Pipe

A139/A139M-04(2010) StandardSpecification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

A143/A143M-07 Standard Practice forSafeguarding Against Embrittlement of Hot-Dip Galvanized Structural SteelProducts and Procedure for DetectingEmbrittlement

A144-04(2009) Specification forFerrotungsten

A146-04(2009) Standard Specificationfor Molybdenum Oxide Products

A148/A148M-08 Standard Specificationfor Steel Castings, High Strength, for Structural Purposes A153/A153M-09Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware A159-83(2011)Standard Specification for Automotive Gray Iron Castings

A167-99(2009) Standard Specificationfor Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip A176-99(2009)Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate,Sheet, and Strip A178/A178M-02(2012) StandardSpecification for Electric-Resistance-Welded Carbon Steel and Carbon-ManganeseSteel Boiler and Superheater Tubes

A179/A179M-90a(2012) StandardSpecification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger andCondenser Tubes

A181/A181M-12 Standard Specificationfor Carbon Steel Forgings, for General-Purpose Piping

A182/A182M-13 Standard Specificationfor Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings,and Valves and Parts for High-TemperatureService

A183-03(2009) Standard Specificationfor Carbon Steel Track Bolts and Nuts

A184/A184M-06(2011) StandardSpecification for Welded Deformed Steel Bar Mats for Concrete Reinforcement A185/A185M-07Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

A185/A185M-RUS-07 Стандартнаяспецификация на стальную сварную гладкую проволочную арматуру для бетона A185/A185M-SP-07 EspecificaciónNormalizada para Refuerzo Electrosoldado de Alambre de Acero Liso, paraConcreto A192/A192M-02(2012) StandardSpecification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service A193/A193M-12bStandard Specification for Alloy-Steel and Stainless Steel Bolting for HighTemperature or High Pressure Service and Other Special PurposeApplications

A194/A194M-12a Standard Specificationfor Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A197/A197M-00(2011) Standard Specificationfor Cupola Malleable Iron

A203/A203M-12 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Nickel A204/A204M-12Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

A209/A209M-03(2012) StandardSpecification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and SuperheaterTubes A210/A210M-02(2012) StandardSpecification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes A213/A213M-13Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler,Superheater, and Heat- Exchanger Tubes

A214/A214M-96(2012) StandardSpecification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger andCondenser Tubes

A216/A216M-12 Standard Specificationfor Steel Castings, Carbon, Suitable for Fusion Welding, for High-TemperatureService A217/A217M-12 Standard Specificationfor Steel Castings, Martensitic Stainless and Alloy, for Pressure-ContainingParts, Suitable for High-Temperature Service

A220/A220M-99(2009) StandardSpecification for Pearlitic Malleable Iron

A225/A225M-12 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel A227/A227M-06(2011)Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs A228/A228M-07Standard Specification for Steel Wire, Music Spring Quality

A229/A229M-12 Standard Specificationfor Steel Wire, Quenched and Tempered for Mechanical Springs A230/A230M-05(2011)e1Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality A231/A231M-10Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

A232/A232M-05(2011)e1 StandardSpecification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire A234/A234M-11aStandard Specification for Piping Fittings of Wrought Carbon Steel and AlloySteel for Moderate and High Temperature Service

A239-95(2009)e1 Standard Practice forLocating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or SteelArticles A240/A240M-13a Standard Specificationfor Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vesselsand for General Applications

A242/A242M-04(2009) StandardSpecification for High-Strength Low-Alloy Structural Steel

A242/A242M-SP-04(2009) EspecificaciónNormalizada para Acero Estructural de Alta Resistencia y Baja Aleación A247-10 StandardTest Method for Evaluating the Microstructure of Graphite in Iron Castings

A249/A249M-10a Standard Specificationfor Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

A250/A250M-05(2009) StandardSpecification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler andSuperheater Tubes A252-10 Standard Specification forWelded and Seamless Steel Pipe Piles

A254/A254M-12 Standard Specificationfor Copper-Brazed Steel Tubing A255-10 Standard Test Methods forDetermining Hardenability of Steel

A255-RUS-10 Стандартные методыопределения закаливаемости стали

A262-13 Standard Practices forDetecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A263-12 StandardSpecification for Stainless Chromium Steel-Clad Plate

A264-12 Standard Specification forStainless Chromium-Nickel Steel-Clad Plate A265-12 Standard Specification forNickel and Nickel-Base Alloy-Clad Steel Plate

A266/A266M-11 Standard Specificationfor Carbon Steel Forgings for Pressure Vessel Components

A268/A268M-10 Standard Specificationfor Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing forGeneral Service

A269-10 Standard Specification forSeamless and Welded Austenitic Stainless Steel Tubing for General Service A270/A270M-10Standard Specification for Seamless and Welded Austenitic Stainless SteelSanitary Tubing A275/A275M-08(2013) Standard Practicefor Magnetic Particle Examination of Steel Forgings

A276-13 Standard Specification forStainless Steel Bars and Shapes

A278/A278M-01(2011) StandardSpecification for Gray Iron Castings for Pressure-Containing Parts forTemperatures Up to 650°F (350°C)

A283/A283M-12a Standard Specificationfor Low and Intermediate Tensile Strength Carbon Steel Plates

A285/A285M-12 Standard Specificationfor Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-TensileStrength A285/A285M-RUS-12 Стандартныетехнические условия на плиты для сосудов под давлением из углеродистой стали с низким и средним пределом прочностина растяжение

A288-91(2013) Standard Specificationfor Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

A289/A289M-97(2013) StandardSpecification for Alloy Steel Forgings for Nonmagnetic Retaining Rings forGenerators A290/A290M-05(2010) StandardSpecification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears A291/A291M-05(2010)Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gearsand Shafts for Reduction Gears

A295/A295M-09 Standard Specificationfor High-Carbon Anti-Friction Bearing Steel

A297/A297M-10 Standard Specificationfor Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

A299/A299M-09 Standard Specificationfor Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

A302/A302M-12 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese- Molybdenum-Nickel

A304-11 Standard Specification forCarbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements A307-12 StandardSpecification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSITensile Strength A308/A308M-10 Standard Specificationfor Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

A309-01(2012) Standard Test Methodfor Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test A311/A311M-04(2010)Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel BarsSubject to Mechanical Property Requirements

A312/A312M-13 Standard Specificationfor Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes A313/A313M-10e1Standard Specification for Stainless Steel Spring Wire

A314-13 Standard Specification forStainless Steel Billets and Bars for Forging

A319-71(2011) Standard Specificationfor Gray Iron Castings for Elevated Temperatures for Non-Pressure ContainingParts A320/A320M-11a Standard Specificationfor Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service A320/A320M-RUS-11a Стандартныетехнические условия на болтовые соединения из легированной и нержавеющей стали для эксплуатации в условияхнизких температур

A322-13 Standard Specification forSteel Bars, Alloy, Standard Grades A323-05(2010) Standard Specificationfor Ferroboron

A324-08(2013) Standard Specificationfor Ferrotitanium

A325-10 Standard Specification forStructural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength A325M-13 StandardSpecification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum TensileStrength (Metric) A327/A327M-11 Standard Test Methodsfor Impact Testing of Cast Irons

A328/A328M-07(2012) StandardSpecification for Steel Sheet Piling

A333/A333M-11 Standard Specificationfor Seamless and Welded Steel Pipe for Low-Temperature Service

A333/A333M-RUS-11 Стандартныетехнические условия на бесшовные и сварные стальные трубы, используемые в условиях низких температур

A334/A334M-04a(2010) Standard Specificationfor Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

A334/A334M-RUS-04a(2010) Cтандартнаяспецификация на бесшовные и сварные трубы из углеродистой и легированной стали для использованияпри низких температурах

A335/A335M-11 Standard Specificationfor Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service A335/A335M-RUS-11 Стандартнаяспецификация на бесшовные трубы из ферритной легированной стали для высокотемпературных условийэксплуатации

A336/A336M-10a Standard Specificationfor Alloy Steel Forgings for Pressure and High-Temperature Parts

A338-84(2009) Standard Specificationfor Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad,Marine, and Other Heavy Duty Service atTemperatures Up to 650°F (345°C)

A340-03a(2011) Standard Terminologyof Symbols and Definitions Relating to Magnetic Testing

A341/A341M-00(2011)e1 Standard TestMethod for Direct Current Magnetic Properties of Materials Using D-CPermeameters and the Ballistic Test Methods

A342/A342M-04(2012) Standard TestMethods for Permeability of Feebly Magnetic Materials

A343/A343M-03(2008) Standard TestMethod for Alternating-Current Magnetic Properties of Materials at Power Frequencies UsingWattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

A345-09 Standard Specification forFlat-Rolled Electrical Steels for Magnetic Applications

A348/A348M-05(2011) Standard TestMethod for Alternating Current Magnetic Properties of Materials Using theWattmeter- Ammeter-Voltmeter Method, 100 to 10000 Hz and 25-cm Epstein Frame

A350/A350M-12 Standard Specificationfor Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

A350/A350M-RUS-12 Стандартнаяспецификация на поковки из углеродистой и низколегированной стали, требующие испытаний на ударную вязкость длядеталей трубопровода

A351/A351M-13 Standard Specificationfor Castings, Austenitic, for Pressure-Containing Parts

A352/A352M-06(2012) StandardSpecification for Steel Castings, Ferritic and Martensitic, forPressure-Containing Parts, Suitable for Low-Temperature Service

A353/A353M-09 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 %Nickel A354-11 Standard Specification forQuenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

A355-89(2012) Standard Specificationfor Steel Bars, Alloys, for Nitriding

A356/A356M-11 Standard Specificationfor Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled forSteam Turbines

A358/A358M-12 Standard Specificationfor Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe forHigh- Temperature Service and GeneralApplications

A363-03(2009)e1 StandardSpecification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand A367-11 StandardTest Methods of Chill Testing of Cast Iron

A368-95a(2009) Standard Specificationfor Stainless Steel Wire Strand

A369/A369M-11 Standard Specificationfor Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

A370-12a Standard Test Methods andDefinitions for Mechanical Testing of Steel Products

A370-RUS-12a Стандартные методыиспытаний и определения механических характеристик стальных изделий A372/A372M-12Standard Specification for Carbon and Alloy Steel Forgings for Thin-WalledPressure Vessels A376/A376M-13 Standard Specificationfor Seamless Austenitic Steel Pipe for High-Temperature Service

A377-03(2008)e1 Standard Index ofSpecifications for Ductile-Iron Pressure Pipe

A380/A380M-13 Standard Practice forCleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, andSystems A381-96(2012) Standard Specificationfor Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems A384/A384M-07(2013)Standard Practice for Safeguarding Against Warpage and Distortion DuringHot-Dip Galvanizing of Steel Assemblies

A385/A385M-11 Standard Practice forProviding High-Quality Zinc Coatings (Hot-Dip)

A387/A387M-11 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum A388/A388M-11Standard Practice for Ultrasonic Examination of Steel Forgings

A388/A388M-RUS-11 Стандартное практическоеруководство по ультразвуковой дефектоскопии стальных поковок A389/A389M-10Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, forPressure-Containing Parts, Suitable for High-Temperature Service

A390-06(2011) Standard Specificationfor Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and StraightLine) A391/A391M-07(2012) StandardSpecification for Grade 80 Alloy Steel Chain

A392-11a Standard Specification forZinc-Coated Steel Chain-Link Fence Fabric

A394-08e1 Standard Specification forSteel Transmission Tower Bolts, Zinc-Coated and Bare

A395/A395M-99(2009) Standard Specificationfor Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

A400-69(2012) Standard Practice forSteel Bars, Selection Guide, Composition, and Mechanical Properties

A401/A401M-10 Standard Specificationfor Steel Wire, Chromium-Silicon Alloy

A403/A403M-12 Standard Specificationfor Wrought Austenitic Stainless Steel Piping Fittings A407-07(2013)Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

A409/A409M-09 Standard Specificationfor Welded Large Diameter Austenitic Steel Pipe for Corrosive orHigh-Temperature Service

A411-08(2013) Standard Specificationfor Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire A413/A413M-07(2012)Standard Specification for Carbon Steel Chain

A414/A414M-10 Standard Specificationfor Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels A416/A416M-12aStandard Specification for Steel Strand, Uncoated Seven-Wire for PrestressedConcrete A418/A418M-10 Standard Practice forUltrasonic Examination of Turbine and Generator Steel Rotor Forgings

A420/A420M-10a Standard Specificationfor Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

A420/A420M-RUS-10a Стандартныетехнические условия на трубные фитинги из кованой углеродистой и легированной стали для эксплуатации в условияхнизких температур

A421/A421M-10 Standard Specificationfor Uncoated Stress-Relieved Steel Wire for Prestressed Concrete A421/A421M-SP-10 Alambre de AceroAliviado de Esfuerzos sin Recubrimiento para Concreto Preesforzado A423/A423M-09Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes A424/A424M-09aStandard Specification for Steel, Sheet, for Porcelain Enameling

A426/A426M-11a Standard Specificationfor Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service A427/A427M-10Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

A428/A428M-10 Standard Test Methodfor Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles A434-06(2012)Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished,Quenched and Tempered A435/A435M-90(2012) StandardSpecification for Straight-Beam Ultrasonic Examination of Steel Plates

A435/A435M-RUS-90(2012) Стандартныетехнические условия на ультразвуковое испытание стальных плит методом прямого преобразователя

A436-84(2011) Standard Specificationfor Austenitic Gray Iron Castings

A437/A437M-12 Standard Specificationfor Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated forHigh- Temperature Service

A439-83(2009) Standard Specificationfor Austenitic Ductile Iron Castings

A447/A447M-11 Standard Specificationfor Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), forHigh-Temperature Service

A449-10 Standard Specification forHex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi MinimumTensile Strength, General Use

A450/A450M-10 Standard Specificationfor General Requirements for Carbon and Low Alloy Steel Tubes

A451/A451M-06(2010) StandardSpecification for Centrifugally Cast Austenitic Steel Pipe for High-TemperatureService A453/A453M-12 Standard Specificationfor High-Temperature Bolting, with Expansion Coefficients Comparable toAustenitic Stainless Steels

A455/A455M-12a Standard Specificationfor Pressure Vessel Plates, Carbon Steel, High-Strength Manganese A456/A456M-08(2013)Standard Specification for Magnetic Particle Examination of LargeCrankshaftForgings A459-08(2013) Standard Specificationfor Zinc-Coated Flat Steel Armoring Tape

A460-11 Standard Specification forCopper-Clad Steel Wire Strand

A463/A463M-10 Standard Specificationfor Steel Sheet, Aluminum-Coated, by the Hot-Dip Process A466/A466M-07(2012)Standard Specification for Weldless Chain

A467/A467M-07(2012) StandardSpecification for Machine and Coil Chain

A469/A469M-07(2012) StandardSpecification for Vacuum-Treated Steel Forgings for Generator Rotors

A470/A470M-05(2010) StandardSpecification for Vacuum-Treated Carbon and Alloy Steel Forgings for TurbineRotors and Shafts

A471/A471M-09 Standard Specificationfor Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels A472/A472M-07(2012)Standard Specification for Heat Stability of Steam Turbine Shafts and RotorForgings

A473-01(2009) Standard Specificationfor Stainless Steel Forgings

A474-03(2013) Standard Specificationfor Aluminum-Coated Steel Wire Strand A475-03(2009)e1 StandardSpecification for Zinc-Coated Steel Wire Strand

A476/A476M-00(2009) StandardSpecification for Ductile Iron Castings for Paper Mill Dryer Rolls A478-97(2008)Standard Specification for Chromium-Nickel Stainless Steel Weaving and KnittingWire

A479/A479M-13a Standard Specificationfor Stainless Steel Bars and Shapes for Use in Boilers and Other PressureVessels A480/A480M-13 Standard Specificationfor General Requirements for Flat-Rolled Stainless and Heat-Resisting SteelPlate, Sheet, and Strip

A481-05(2010) Standard Specificationfor Chromium Metal A482/A482M-11 Standard Specificationfor Ferrochrome-Silicon A483/A483M-10 Standard Specificationfor Silicomanganese

A484/A484M-13a Standard Specificationfor General Requirements for Stainless Steel Bars, Billets, and Forgings A485-09 StandardSpecification for High Hardenability Antifriction Bearing Steel

A487/A487M-93(2012) StandardSpecification for Steel Castings Suitable for Pressure Service A488/A488M-12Standard Practice for Steel Castings, Welding, Qualifications of Procedures andPersonnel A489-12 Standard Specification forCarbon Steel Lifting Eyes

A490-12 Standard Specification forStructural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

A490M-12 Standard Specification forHigh-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints(Metric) A491-11 Standard Specification forAluminum-Coated Steel Chain-Link Fence Fabric

A492-95(2009) Standard Specificationfor Stainless Steel Rope Wire

A493-09 Standard Specification forStainless Steel Wire and Wire Rods for Cold Heading and Cold Forging A494/A494M-13Standard Specification for Castings, Nickel and Nickel Alloy

A495-06(2010) Standard Specificationfor Calcium-Silicon Alloys

A496/A496M-07 Standard Specificationfor Steel Wire, Deformed, for Concrete Reinforcement A497/A497M-07Standard Specification for Steel Welded Wire Reinforcement, Deformed, forConcrete

A497/A497M-SP-07 EspecificaciónNormalizada para Refuerzo Electrosoldado de Alambre de Acero, Corrugado, para Concreto

A498-06 Standard Specification forSeamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins A499-89(2008)Standard Specification for Steel Bars and Shapes, Carbon Rolled from ―T‖ Rails

A500/A500M-10a Standard Specificationfor Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

A500/A500M-RUS-10a Стандартныетехнические условия на холодногнутые, сварные и бесшовные круглые и профильные конструкционные трубы изуглеродистой стали

A500/A500M-SP-10a EspecificaciónNormalizada para Tubos Estructurales de Acero al Carbono Conformados en Frío, Electrosoldados y sin Costura, deforma Circular y no Circular

A501-07 Standard Specification forHot-Formed Welded and Seamless Carbon Steel Structural Tubing

A501-SP-07 Especificación Normalizadapara Tubos Estructurales de Acero al Carbono Conformados en Caliente, Electrosoldados ysin Costura

A502-03(2009) Standard Specificationfor Rivets, Steel, Structural

A503/A503M-01(2011) Standard Specificationfor Ultrasonic Examination of Forged Crankshafts A504/A504M-08(2013)Standard Specification for Wrought Carbon Steel Wheels

A505-12 Standard Specification forSteel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirementsfor A506-12 Standard Specification forAlloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A507-12 Standard Specification forDrawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A508/A508M-05b(2010) StandardSpecification for Quenched and Tempered Vacuum-Treated Carbon and Alloy SteelForgings for Pressure Vessels

A510/A510M-13 Standard Specificationfor General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

A511/A511M-12 Standard Specificationfor Seamless Stainless Steel Mechanical Tubing

A512-06(2012) Standard Specificationfor Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

A513/A513M-12 Standard Specificationfor Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing A514/A514M-05(2009)Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy SteelPlate, Suitable for Welding

A515/A515M-10 Standard Specificationfor Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A516/A516M-10 Standard Specificationfor Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

A516/A516M-RUS-10 Стандартнаяспецификация на толстолистовую углеродистую сталь для сосудов, работающих под давлением для применения приумеренных и низких температурах

A517/A517M-10 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered A518/A518M-99(2012)Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

A519-06(2012) Standard Specificationfor Seamless Carbon and Alloy Steel Mechanical Tubing

A521/A521M-06(2011) StandardSpecification for Steel, Closed-Impression Die Forgings for General IndustrialUse A522/A522M-11 Standard Specificationfor Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, andParts for Low-Temperature Service

A523-96(2012) Standard Specificationfor Plain End Seamless and Electric-Resistance-Welded Steel Pipe forHigh-Pressure Pipe-Type Cable Circuits

A524-96(2012) Standard Specificationfor Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures A529/A529M-05(2009)Standard Specification for High-Strength Carbon-Manganese Steel of StructuralQuality A529/A529M-RUS-05(2009) Стандартныетехнические условия на высокопрочную марганцево-углеродистую сталь конструкционного качества

A530/A530M-12 Standard Specificationfor General Requirements for Specialized Carbon and Alloy Steel Pipe A531/A531M-13Standard Practice for Ultrasonic Examination of Turbine-Generator SteelRetaining Rings A532/A532M-10 Standard Specificationfor Abrasion-Resistant Cast Irons

A533/A533M-09e1 StandardSpecification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered,Manganese- Molybdenum andManganese-Molybdenum-Nickel

A534-09 Standard Specification forCarburizing Steels for Anti-Friction Bearings

A534-RUS-09 Стандартная спецификацияна науглероживание сталей для антифрикционных вкладышей подшипников A536-84(2009)Standard Specification for Ductile Iron Castings

A537/A537M-08 Standard Specificationfor Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel A537/A537M-RUS-08 Стандартнаяспецификация на толстолистовую марганцевокремнистоуглеродистую термообработанную сталь для сосудов,работающих под давлением

A540/A540M-11 Standard Specificationfor Alloy-Steel Bolting for Special Applications

A541/A541M-05(2010) StandardSpecification for Quenched and Tempered Carbon and Alloy Steel Forgings forPressure Vessel Components

A542/A542M-09 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium- Molybdenum, andChromium-Molybdenum-Vanadium

A542/A542M-RUS-09 Стандартныетехнические условия на плиты для сосудов под давлением, закаленные и отпущенные, из стали, легированнойхромом и молибденом и хромом, молибденом и ванадием

A543/A543M-09 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium- Molybdenum

A550-06(2010) Standard Specificationfor Ferrocolumbium

A551/A551M-08(2013) StandardSpecification for Carbon Steel Tires for Railway and Rapid Transit Applications A553/A553M-10Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered8 and 9 Percent Nickel

A554-13 Standard Specification forWelded Stainless Steel Mechanical Tubing

A555/A555M-05(2009) StandardSpecification for General Requirements for Stainless Steel Wire and Wire Rods A556/A556M-96(2012)Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater HeaterTubes A560/A560M-12 Standard Specificationfor Castings, Chromium-Nickel Alloy

A561-08 Standard Practice forMacroetch Testing of Tool Steel Bars

A561-RUS-08 Стандартная методикаконтроля макроструктуры травлением для сортового проката из инструментальной стали

A562/A562M-10 Standard Specificationfor Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass orDiffused Metallic Coatings

A563-07a Standard Specification forCarbon and Alloy Steel Nuts

A563M-07 Standard Specification forCarbon and Alloy Steel Nuts [Metric]

A564/A564M-10 Standard Specificationfor Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes A564/A564M-RUS-10 Стандартнаяспецификация на горячекатаную и холоднотянутую сортовую и фасонную дисперсионно-твердеющую нержавеющуюсталь

A565/A565M-10 Standard Specificationfor Martensitic Stainless Steel Bars for High-Temperature Service

A568/A568M-13 Standard Specificationfor Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,General Requirements for

A571/A571M-01(2011) StandardSpecification for Austenitic Ductile Iron Castings for Pressure-ContainingParts Suitable for Low-Temperature Service

A572/A572M-12a Standard Specificationfor High-Strength Low-Alloy Columbium-Vanadium Structural Steel A573/A573M-05(2009)Standard Specification for Structural Carbon Steel Plates of Improved Toughness A574M-12 StandardSpecification for Alloy Steel Socket-Head Cap Screws (Metric)

A574-13 Standard Specification forAlloy Steel Socket-Head Cap Screws

A575-96(2007) Standard Specificationfor Steel Bars, Carbon, Merchant Quality, M-Grades

A575-RUS-96(2007) Стандартныетехнические условия на прутки из коммерческой углеродистой стали М-марок A576-90b(2012)Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

A577/A577M-90(2012) StandardSpecification for Ultrasonic Angle-Beam Examination of Steel Plates

A578/A578M-07(2012) StandardSpecification for Straight-Beam Ultrasonic Examination of Rolled Steel Platesfor Special Applications

A579/A579M-04a(2009) StandardSpecification for Superstrength Alloy Steel Forgings

A579/A579M-RUS-04a(2009) Стандартнаяспецификация на поковки из сверхпрочной легированной стали A580/A580M-13Standard Specification for Stainless Steel Wire

A581/A581M-95b(2009) StandardSpecification for Free-Machining Stainless Steel Wire and Wire Rods A582/A582M-12e1Standard Specification for Free-Machining Stainless Steel Bars

A586-04a(2009)e1 StandardSpecification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

A587-96(2012) Standard Specificationfor Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry A588/A588M-10Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50ksi [345 MPa] Minimum Yield Point, with Atmospheric CorrosionResistance

A588/A588M-SP-10 EspecificaciónNormalizada para Acero Estructural de Alta Resistencia y Baja Aleación, conPunto Mínimo de Fluencia de hasta 50 ksi [345MPa], con Resistencia a la Corrosión Atmosférica

A589/A589M-06(2012) StandardSpecification for Seamless and Welded Carbon Steel Water-Well Pipe

A592/A592M-10 Standard Specificationfor High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts forPressure Vessels

A595/A595M-11 Standard Specificationfor Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for StructuralUse A596/A596M-95(2009)e1 Standard TestMethod for Direct-Current Magnetic Properties of Materials Using the BallisticMethod and Ring Specimens

A597-87(2010) Standard Specificationfor Cast Tool Steel

A598/A598M-02(2007) Standard TestMethod for Magnetic Properties of Magnetic Amplifier Cores A599/A599M-07(2012)Standard Specification for Tin Mill Products, Electrolytic Tin-Coated,Cold-Rolled Sheet A600-92a(2010) Standard Specificationfor Tool Steel High Speed

A601/A601M-10 Standard Specificationfor Electrolytic Manganese Metal A602-94(2009) Standard Specificationfor Automotive Malleable Iron Castings

A603-98(2009)e1 StandardSpecification for Zinc-Coated Steel Structural Wire Rope

A604/A604M-07(2012) Standard Practicefor Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets A606/A606M-09aStandard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy,Hot-Rolled and Cold-Rolled, with Improved Atmospheric CorrosionResistance

A608/A608M-12 Standard Specificationfor Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for PressureApplication at High Temperatures

A609/A609M-12 Standard Practice forCastings, Carbon, Low-Alloy, and Martensitic Stainless Steel, UltrasonicExamination Thereof

A610-79(2009) Standard Test Methodsfor Sampling and Testing Ferroalloys for Determination of Size

A612/A612M-12 Standard Specificationfor Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

A615/A615M-12 Standard Specificationfor Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement A615/A615M-SP-12 EspecificaciónNormalizada para Barras de Acero al Carbono Lisas y Corrugadas para Refuerzo de Concreto

A618/A618M-04(2010) StandardSpecification for Hot-Formed Welded and Seamless High-Strength Low-AlloyStructural Tubing

A623-11 Standard Specification forTin Mill Products, General Requirements

A623M-11 Standard Specification forTin Mill Products, General Requirements [Metric]

A624/A624M-03(2008)e1 StandardSpecification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced A625/A625M-08Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

A626/A626M-03(2008)e1 StandardSpecification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

A627-03(2011) Standard Test Methodsfor Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

A630-03(2009) Standard Test Methodsfor Determination of Tin Coating Weights for Electrolytic Tin Plate

A632-04(2009) Standard Specificationfor Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

A633/A633M-01(2011) StandardSpecification for Normalized High-Strength Low-Alloy Structural Steel Plates A633/A633M-RUS-01(2011) Стандартныетехнические условия на плиты из нормализованной высокопрочной низколегированной конструкционнойстали

A635/A635M-09b Standard Specificationfor Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural,High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability,General Requirements for A635/A635M-RUS-09b Стандартныетехнические условия на сталь, тонколистовую и полосовую, в рулонах большой толщины, горячекатаную, легированную,углеродистую, конструкционную, высокопрочную низколегированную и высокопрочную низколегированную сулучшенной формуемостью, общие требования

A636-08(2013) Standard Specificationfor Nickel Oxide Sinter

A638/A638M-10 Standard Specificationfor Precipitation Hardening Iron Base Superalloy Bars, Forgings, and ForgingStock for High-Temperature Service

A640-97(2009)e1 StandardSpecification for Zinc-Coated Steel Strand for Messenger Support of Figure 8Cable A641/A641M-09a Standard Specificationfor Zinc-Coated (Galvanized) Carbon Steel Wire

A644-13 Standard Terminology Relatingto Iron Castings

A645/A645M-10 Standard Specificationfor Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially HeatTreated A646/A646M-06(2011) StandardSpecification for Premium Quality Alloy Steel Blooms and Billets for Aircraftand Aerospace Forgings

A648-12 Standard Specification forSteel Wire, Hard-Drawn for Prestressed Concrete Pipe A649/A649M-10Standard Specification for Forged Steel Rolls Used for Corrugating PaperMachinery A650/A650M-03(2008) StandardSpecification for Tin Mill Products, Black Plate, Double Reduced

A653/A653M-11 Standard Specificationfor Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated(Galvannealed) by the Hot-Dip Process

A656/A656M-12ae1 StandardSpecification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Platewith Improved Formability

A657/A657M-03(2008)e1 StandardSpecification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated,Single and Double Reduced

A659/A659M-12 Standard Specificationfor Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25Maximum Percent), Hot-Rolled

A660/A660M-11 Standard Specificationfor Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

A662/A662M-12 Standard Specificationfor Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate andLower Temperature Service

A663/A663M-12 Standard Specificationfor Steel Bars, Carbon, Merchant Quality, Mechanical Properties A664-11 StandardPractice for Identification of Standard Electrical Steel Grades in ASTMSpecifications

A666-10 Standard Specification forAnnealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, andFlat Bar A667/A667M-87(2012) StandardSpecification for Centrifugally Cast Dual Metal (Gray and White Cast Iron)Cylinders A668/A668M-04(2009) StandardSpecification for Steel Forgings, Carbon and Alloy, for General Industrial Use A671/A671M-10Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmosphericand Lower Temperatures

A671/A671M-RUS-10 Стандартныетехнические условия на стальную трубу, полученную электросваркой оплавлением, для температуры окружающей среды ипониженных температур

A672/A672M-09 Standard Specificationfor Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

A673/A673M-07(2012) Standard Specificationfor Sampling Procedure for Impact Testing of Structural Steel

A673/A673M-RUS-07(2012) Стандартнаяспецификация на процедуру отбора образцов конструкционной стали для испытаний на ударную вязкость

A674-10 Standard Practice forPolyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids

A675/A675M-03(2009) StandardSpecification for Steel Bars, Carbon, Hot-Wrought, Special Quality, MechanicalProperties A675/A675M-RUS-03(2009) Стандартнаяспецификация на горячедеформируемую углеродистую сортовую сталь специального качества. Механическиесвойства

A677-12 Standard Specification forNonoriented Electrical Steel Fully Processed Types A679/A679M-06(2012)Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn A681-08 StandardSpecification for Tool Steels Alloy

A683-05(2010) Standard Specificationfor Nonoriented Electrical Steel, Semiprocessed Types A684/A684M-12Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

A686-92(2010) Standard Specificationfor Tool Steel, Carbon

A688/A688M-12 Standard Specificationfor Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes A689-97(2007)e1Standard Specification for Carbon and Alloy Steel Bars for Springs

A690/A690M-07(2012) StandardSpecification for High-Strength Low-Alloy Nickel, Copper, Phosphorus SteelH-Piles and Sheet Piling with AtmosphericCorrosion Resistance for Use in Marine Environments

A691/A691M-09 Standard Specificationfor Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-PressureService at High Temperatures

A691/A691M-RUS-09 Стандартныетехнические условия на трубу из углеродистой и легированной стали, полученную электросваркой оплавлением, дляэксплуатации в условиях высокого давления при высоких температурах

A693-06 Standard Specification forPrecipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, andStrip

A694/A694M-08 Standard Specificationfor Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, andParts for High-Pressure Transmission Service

A696-90a(2012) Standard Specificationfor Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, forPressure Piping Components

A697/A697M-03(2008) Standard TestMethod for Alternating Current Magnetic Properties of Laminated Core SpecimenUsing Voltmeter-Ammeter-Wattmeter Methods

A698/A698M-07 Standard Test Methodfor Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields A700-05 StandardPractices for Packaging, Marking, and Loading Methods for Steel Products forShipment

A700-RUS-05 Стандартные методыупаковки, маркировки и погрузки стальных изделий при их отправке потребителю A701/A701M-10Standard Specification for Ferromanganese-Silicon

A702-89(2006) Standard Specificationfor Steel Fence Posts and Assemblies, Hot Wrought

A703/A703M-13 Standard Specificationfor Steel Castings, General Requirements, for Pressure-Containing Parts A704/A704M-06(2011)Standard Specification for Welded Steel Plain Bar or Rod Mats for ConcreteReinforcement A705/A705M-95(2009) StandardSpecification for Age-Hardening Stainless Steel Forgings

A706/A706M-09b Standard Specificationfor Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement A706/A706M-SP-09b EspecificaciónNormalizada para Barras de Acero de Baja Aleación Lisas y Corrugadas paraRefuerzo de Concreto

A707/A707M-10 Standard Specificationfor Forged Carbon and Alloy Steel Flanges for Low-Temperature Service A709/A709M-13Standard Specification for Structural Steel for Bridges

A710/A710M-02(2007) StandardSpecification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium- Molybdenum-ColumbiumAlloy Structural Steel Plates

A710/A710M-RUS-02(2007) Стандартныетехнические условия на плиты из дисперсноупрочненной низкоуглеродистой никель-медь-хром-молибден-ниобиевойлегированной конструкционной стали

A711/A711M-07(2012) StandardSpecification for Steel Forging Stock

A712-07 Standard Test Method forElectrical Resistivity of Soft Magnetic Alloys

A713-04(2010) Standard Specificationfor Steel Wire, High-Carbon Spring, for Heat-Treated Components

A713-RUS-04(2010) Стандартнаяспецификация на стальную проволоку, пружины из высокоуглеродистой стали, для термообрабатываемыхдеталей

A714-99(2009)e1 StandardSpecification for High-Strength Low-Alloy Welded and Seamless Steel Pipe A716-08 StandardSpecification for Ductile Iron Culvert Pipe

A717/A717M-12 Standard Test Methodfor Surface Insulation Resistivity of Single-Strip Specimens A719/A719M-02(2007)Standard Test Method for Lamination Factor of Magnetic Materials A720/A720M-02(2011)Standard Test Method for Ductility of Nonoriented Electrical Steel A721/A721M-02(2011)Standard Test Method for Ductility of Oriented Electrical Steel

A722/A722M-12 Standard Specificationfor Uncoated High-Strength Steel Bars for Prestressing Concrete A723/A723M-10Standard Specification for Alloy Steel Forgings for High-Strength PressureComponent Application A724/A724M-09 Standard Specificationfor Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, forWelded Layered Pressure Vessels

A726-05(2010) Standard Specificationfor Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types A727/A727M-11Standard Specification for Carbon Steel Forgings for Piping Components withInherent Notch Toughness A729/A729M-09e1 StandardSpecification for Alloy Steel Axles, Heat-Treated, for Mass Transit andElectric Railway Service A732/A732M-09 Standard Specificationfor Castings, Investment, Carbon and Low Alloy Steel for General Application,and Cobalt Alloy for High Strength atElevated Temperatures

A733-03(2009)e1 Standard Specificationfor Welded and Seamless Carbon Steel and Austenitic Stainless Steel PipeNipples A734/A734M-12 Standard Specificationfor Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel,Quenched- and-Tempered

A735/A735M-12 Standard Specificationfor Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderateand Lower Temperature Service

A736/A736M-12 Standard Specificationfor Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium- Molybdenum-ColumbiumAlloy Steel

A737/A737M-09 Standard Specificationfor Pressure Vessel Plates, High-Strength, Low-Alloy Steel

A738/A738M-12a Standard Specificationfor Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and LowerTemperature Service

A739-90a(2012) Standard Specificationfor Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature orPressure-Containing Parts, or Both

A740-98(2008) Standard Specificationfor Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) A741-11e1 StandardSpecification for Metallic-Coated Steel Wire Rope and Fittings for HighwayGuardrail

A742/A742M-13 Standard Specificationfor Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated SteelPipe A743/A743M-13 Standard Specificationfor Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, forGeneral Application

A744/A744M-10e1 StandardSpecification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, forSevere Service A745/A745M-12 Standard Practice forUltrasonic Examination of Austenitic Steel Forgings

A746-09 Standard Specification forDuctile Iron Gravity Sewer Pipe

A747/A747M-12 Standard Specificationfor Steel Castings, Stainless, Precipitation Hardening

A748/A748M-87(2012) StandardSpecification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rollsfor Pressure Vessel Use

A749/A749M-08 Standard Specificationfor Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

A751-11 Standard Test Methods,Practices, and Terminology for Chemical Analysis of Steel Products

A751-RUS-11 Стандартные методыиспытаний, практические руководства и терминология для проведения химического анализа стальнойпродукции

A753-08 Standard Specification forWrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) A754/A754M-11Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel byX-Ray Fluorescence A755/A755M-11 Standard Specificationfor Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by theCoil- Coating Process for Exterior ExposedBuilding Products

A756-09 Standard Specification forStainless Anti-Friction Bearing Steel

A757/A757M-10 Standard Specificationfor Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, forLow-Temperature Service

A758/A758M-10 Standard Specificationfor Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved NotchToughness A759-10 Standard Specification forCarbon Steel Crane Rails

A760/A760M-10 Standard Specificationfor Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

A761/A761M-04(2009) StandardSpecification for Corrugated Steel Structural Plate, Zinc-Coated, forField-Bolted Pipe, Pipe- Arches, and Arches

A762/A762M-08 Standard Specificationfor Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains A763-93(2009)Standard Practices for Detecting Susceptibility to Intergranular Attack inFerritic Stainless Steels

A764-07(2012) Standard Specificationfor Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size forMechanical Springs

A765/A765M-07(2012) StandardSpecification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-ComponentForgings with Mandatory Toughness Requirements

A767/A767M-09 Standard Specificationfor Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A767/A767M-SP-09 EspecificaciónNormalizada para Barras de Acero Cincadas (Galvanizadas) para Refuerzo deConcreto A768/A768M-05(2010) StandardSpecification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for TurbineRotors and Shafts

A769/A769M-05(2010) StandardSpecification for Carbon and High-Strength Electric Resistance Forge-WeldedSteel Structural Shapes

A770/A770M-03(2012) StandardSpecification for Through-Thickness Tension Testing of Steel Plates for SpecialApplications A770/A770M-RUS-03(2012) Стандартнаяспецификация по испытанию на растяжение в направлении толщины стальных листов для специального применения

A772/A772M-00(2011)e1 Standard TestMethod for AC Magnetic Permeability of Materials Using Sinusoidal Current A773/A773M-01(2009)Standard Test Method for dc Magnetic Properties of Materials Using Ring andPermeameter Procedures with dc ElectronicHysteresigraphs

A774/A774M-09 Standard Specificationfor As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low andModerate Temperatures

A775/A775M-07b Standard Specificationfor Epoxy-Coated Steel Reinforcing Bars

A775/A775M-SP-07b EspecificaciónNormalizada para Barras de Acero de Refuerzo Recubiertas con Epoxi A778-01(2009)e1Standard Specification for Welded, Unannealed Austenitic Stainless SteelTubular Products

A779/A779M-12 Standard Specificationfor Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete A780/A780M-09Standard Practice for Repair of Damaged and Uncoated Areas of Hot-DipGalvanized Coatings A781/A781M-13 Standard Specificationfor Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A786/A786M-05(2009) StandardSpecification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, andAlloy Steel Floor Plates

A787/A787M-09 Standard Specificationfor Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing A788/A788M-11Standard Specification for Steel Forgings, General Requirements

A789/A789M-13 Standard Specificationfor Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for GeneralService

A790/A790M-13 Standard Specificationfor Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe A792/A792M-10Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by theHot-Dip Process A793-96(2009) Standard Specificationfor Rolled Floor Plate, Stainless Steel

A794/A794M-12 Standard Specificationfor Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

A795/A795M-08(2012) StandardSpecification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded andSeamless Steel Pipe for Fire Protection Use

A796/A796M-10 Standard Practice forStructural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Stormand Sanitary Sewers and Other BuriedApplications

A798/A798M-07 Standard Practice forInstalling Factory-Made Corrugated Steel Pipe for Sewers and Other Applications A799/A799M-10Standard Practice for Steel Castings, Stainless, Instrument Calibration, forEstimating Ferrite Content A800/A800M-10 Standard Practice forSteel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

A801-09 Standard Specification forWrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) A802/A802M-95(2010)e1Standard Practice for Steel Castings, Surface Acceptance Standards, VisualExamination A803/A803M-12 Standard Specificationfor Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes A804/A804M-04(2009)e1Standard Test Methods for Alternating-Current Magnetic Properties of Materialsat Power Frequencies Using Sheet-Type TestSpecimens

A805/A805M-09 Standard Specificationfor Steel, Flat Wire, Carbon, Cold-Rolled

A807/A807M-02(2008) Standard Practicefor Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

A809-08(2013) Standard Specificationfor Aluminum-Coated (Aluminized) Carbon Steel Wire A810-01(2009)e1Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

A810-RUS-01(2009)e1 Стандартнаяспецификация на оцинкованную обмоточную сетку для стальных труб

A811-03(2008) Standard Specificationfor Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques A813/A813M-09 StandardSpecification for Single- or Double-Welded Austenitic Stainless Steel Pipe

A814/A814M-08 Standard Specificationfor Cold-Worked Welded Austenitic Stainless Steel Pipe

A815/A815M-10a Standard Specificationfor Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless SteelPiping Fittings A817-12 Standard Specification forMetallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled TensionWire

A818-06(2010) Standard Specificationfor Coppered Carbon Steel Wire

A820/A820M-11 Standard Specificationfor Steel Fibers for Fiber-Reinforced Concrete

A821/A821M-10 Standard Specificationfor Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

A822/A822M-04(2010) StandardSpecification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic SystemService A823-99(2012) Standard Specificationfor Statically Cast Permanent Mold Gray Iron Castings

A824-01(2012) Standard Specificationfor Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence A827/A827M-11Standard Specification for Plates, Carbon Steel, for Forging and SimilarApplications

A829/A829M-11 Standard Specificationfor Alloy Structural Steel Plates

A830/A830M-11 Standard Specificationfor Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

A832/A832M-10 Standard Specificationfor Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium A832/A832M-RUS-10 Стандартныетехнические условия на плиты для сосудов под давлением из стали, легированной хромом, молибденом и ванадием

A833-08a Standard Practice forIndentation Hardness of Metallic Materials by Comparison Hardness Testers A834-95(2011)Standard Specification for Common Requirements for Iron Castings for GeneralIndustrial Use A835/A835M-10 Standard Specificationfor Sizes of Ferroalloys and Alloy Additives

A836/A836M-02(2007) StandardSpecification for Titanium-Stabilized Carbon Steel Forgings for Glass-LinedPiping and Pressure Vessel Service

A837/A837M-06(2011) StandardSpecification for Steel Forgings, Alloy, for Carburizing Applications

A837/A837M-RUS-06(2011) Стандартнаяспецификация на легированные стальные поковки, используемые для цементации

A838-02(2007) Standard Specificationfor Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for RelayApplications A839-02(2008) Standard Specificationfor Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft MagneticApplications A841/A841M-03a(2007) StandardSpecification for Steel Plates for Pressure Vessels, Produced byThermo-Mechanical Control Process (TMCP)

A842-11a Standard Specification forCompacted Graphite Iron Castings

A844/A844M-09 Standard Specificationfor Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by theDirect- Quenching Process

A847/A847M-12 Standard Specificationfor Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric CorrosionResistance

A848-01(2011) Standard Specificationfor Low-Carbon Magnetic Iron

A849-10 Standard Specification forPost-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer andDrainage Pipe A853-04(2010) Standard Specificationfor Steel Wire, Carbon, for General Use

A854/A854M-08(2013) Standard Specificationfor Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire A855/A855M-03(2009)Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel WireStrand A856/A856M-03(2009) StandardSpecification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire A857/A857M-07(2013)Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

A858/A858M-10a Standard Specificationfor Heat-Treated Carbon Steel Fittings for Low-Temperature and CorrosiveService A859/A859M-04(2009) StandardSpecification for Age-Hardening Alloy Steel Forgings for Pressure VesselComponents A860/A860M-10 Standard Specificationfor Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings

A861-04(2008) Standard Specificationfor High-Silicon Iron Pipe and Fittings

A862/A862M-98(2008) Standard Practicefor Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe A865/A865M-06(2012)Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated(Galvanized) Welded or Seamless, for Use in Steel PipeJoints

A866-09 Standard Specification forMedium Carbon Anti-Friction Bearing Steel A867-03(2008) Standard Specificationfor Iron-Silicon Relay Steels

A871/A871M-12 Standard Specificationfor High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

A872/A872M-07a(2012) StandardSpecification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipefor Corrosive Environments

A874/A874M-98(2009) StandardSpecification for Ferritic Ductile Iron Castings Suitable for Low-TemperatureService A875/A875M-13 Standard Specificationfor Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process A876-12 StandardSpecification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel,Fully Processed Types

A877/A877M-10e1 StandardSpecification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-VanadiumAlloy Valve Spring Quality

A878/A878M-05(2011) StandardSpecification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality A879/A879M-12Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Processfor Applications Requiring Designation of the Coating Mass onEach Surface

A881/A881M-10 Standard Specificationfor Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties A882/A882M-04a(2010)Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing SteelStrand A884/A884M-12 Standard Specificationfor Epoxy-Coated Steel Wire and Welded Wire Reinforcement

A884/A884M-SP-12 EspecificaciónNormalizada para Alambre y Refuerzo Electrosoldado de Alambre de AceroRecubierto con Epoxi

A886/A886M-12 Standard Specificationfor Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete A887-89(2009)Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip forNuclear Application

A888-13 Standard Specification forHubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste,and Vent Piping Applications

A889/A889M-03(2008) Standard TestMethod for Alternating-Current Magnetic Properties of Materials at Low MagneticFlux Density Using theVoltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

A890/A890M-12a Standard Specificationfor Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic)for General Application

A891/A891M-10 Standard Specificationfor Precipitation Hardening Iron Base Superalloy Forgings for Turbine RotorDisks and Wheels

A892-09 Standard Guide for Definingand Rating the Microstructure of High Carbon Bearing Steels

A893/A893M-03(2008) Standard TestMethod for Complex Dielectric Constant of Nonmetallic Magnetic Materials atMicrowave Frequencies

A894/A894M-00(2011)e1 Standard TestMethod for Saturation Magnetization or Induction of Nonmetallic MagneticMaterials A895-89(2009) Standard Specificationfor Free-Machining Stainless Steel Plate, Sheet, and Strip

A896/A896M-09 Standard Practice forConducting Case Studies on Galvanized Structures A897/A897M-06(2011)Standard Specification for Austempered Ductile Iron Castings

A898/A898M-07(2012) StandardSpecification for Straight Beam Ultrasonic Examination of Rolled SteelStructural Shapes A899-91(2007) Standard Specificationfor Steel Wire, Epoxy-Coated

A900/A900M-01(2012) Standard TestMethod for Lamination Factor of Amorphous Magnetic Strip A901-12 StandardSpecification for Amorphous Magnetic Core Alloys, Semi-Processed Types A902-13 StandardTerminology Relating to Metallic Coated Steel Products

A903/A903M-99(2012) StandardSpecification for Steel Castings, Surface Acceptance Standards, MagneticParticle and LiquidPenetrantInspection

A904-09 Standard Specification for 50Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts A905-04(2010)Standard Specification for Steel Wire, Pressure Vessel Winding

A906/A906M-02(2010) StandardSpecification for Grade 80 and Grade 100 Alloy Steel Chain Slings for OverheadLifting A908-03(2008)e1 StandardSpecification for Stainless Steel Needle Tubing

A909/A909M-06(2011) StandardSpecification for Steel Forgings, Microalloy, for General Industrial Use

A910/A910M-12 Standard Specificationfor Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete A911/A911M-11Standard Specification for Uncoated, Stress-Relieved Steel Bars for PrestressedConcrete Ties A912/A912M-11 Standard Test Methodfor Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies UsingWattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

A913/A913M-11 Standard Specificationfor High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching andSelf-Tempering Process

A914/A914M-92(2011) StandardSpecification for Steel Bars Subject to Restricted End-Quench HardenabilityRequirements A915/A915M-08(2013) StandardSpecification for Steel Castings, Carbon, and Alloy, Chemical RequirementsSimilar to Standard Wrought Grades

A917-08 Standard Specification forSteel Sheet, Coated by the Electrolytic Process for Applications RequiringDesignation of the Coating Mass on Each Surface(General Requirements)

A918-06(2011) Standard Specificationfor Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process forApplications Requiring Designation of the CoatingMass on Each Surface

A920/A920M-07 Standard Specificationfor Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties A921/A921M-93(2011)Standard Specification for Steel Bars, Microalloy, Hot-Wrought, SpecialQuality, for Subsequent Hot Forging

A922-05(2010) Standard Specificationfor Silicon Metal

A923-08 Standard Test Methods forDetecting Detrimental Intermetallic Phase in Duplex Austenitic/FerriticStainless Steels A924/A924M-13 Standard Specificationfor General Requirements for Steel Sheet, Metallic-Coated by the Hot-DipProcess A925-03(2009)e1 StandardSpecification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel OverheadGround Wire Strand A926-03(2008) Standard Test Methodfor Comparing the Abrasion Resistance of Coating Materials for Corrugated MetalPipe A927/A927M-11 Standard Test Methodfor Alternating-Current Magnetic Properties of Toroidal Core Specimens Usingthe Voltmeter-Ammeter-Wattmeter Method

A928/A928M-11 Standard Specificationfor Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Weldedwith Addition of Filler Metal

A929/A929M-01(2007) StandardSpecification for Steel Sheet, Metallic-Coated by the Hot-Dip Process forCorrugated Steel Pipe

A930-09 Standard Practice forLife-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, StormSewers, and Other Buried Conduits

A931-08(2013) Standard Test Methodfor Tension Testing of Wire Ropes and Strand

A932/A932M-01(2012) Standard TestMethod for Alternating-Current Magnetic Properties of Amorphous Materials atPower Frequencies UsingWattmeter-Ammeter-Voltmeter Method with Sheet Specimens

A933/A933M-10 Standard Specificationfor Vinyl-Coated Steel Wire and Welded Wire Reinforcement A934/A934M-07Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

A934/A934M-SP-07 EspecificaciónNormalizada para Barras de Acero de Refuerzo Prefabricadas Recubiertas conEpoxi A937/A937M-12 Standard Test Methodfor Determining Interlaminar Resistance of Insulating Coatings Using TwoAdjacent Test Surfaces

A938-07(2013) Standard Test Methodfor Torsion Testing of Wire

A939/A939M-12 Standard Practice forUltrasonic Examination from Bored Surfaces of Cylindrical Forgings A940/A940M-06(2011)Standard Specification for Vacuum Treated Steel Forgings, Alloy, DifferentiallyHeat Treated, for Turbine Rotors

A941-13b Standard TerminologyRelating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A942-95(2012) Standard Specification forCentrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant RollShells A943/A943M-01(2009) StandardSpecification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

A944-10 Standard Test Method forComparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

A945/A945M-06(2011) StandardSpecification for High-Strength Low-Alloy Structural Steel Plate with LowCarbon and Restricted Sulfur for ImprovedWeldability, Formability, and Toughness

A947M-13 Standard Specification forTextured Stainless Steel Sheet [Metric]

A949/A949M-01(2009) StandardSpecification for Spray-Formed Seamless Ferritic/Austenitic Stainless SteelPipe A950/A950M-11 Standard Specificationfor Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

A951/A951M-11 Standard Specificationfor Steel Wire for Masonry Joint Reinforcement

A952/A952M-02(2010) StandardSpecification for Forged Grade 80 and Grade 100 Steel Lifting Components andWelded Attachment Links

A955/A955M-12e1 StandardSpecification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement A956-12 StandardTest Method for Leeb Hardness Testing of Steel Products

A957/A957M-13 Standard Specificationfor Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A958/A958M-10 Standard Specificationfor Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical RequirementsSimilar to Standard Wrought Grades

A959-11 Standard Guide for SpecifyingHarmonized Standard Grade Compositions for Wrought Stainless Steels A960/A960M-10Standard Specification for Common Requirements for Wrought Steel PipingFittings

A960/A960M-RUS-10 Стандартныетехнические условия на общие требования для трубных фитингов из ковкой стали A961/A961M-12aStandard Specification for Common Requirements for Steel Flanges, ForgedFittings, Valves, and Parts for Piping Applications

A962/A962M-13 Standard Specificationfor Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to theCreep Range

A964/A964M-03(2011) StandardSpecification for Corrugated Steel Box Culverts

A965/A965M-12 Standard Specificationfor Steel Forgings, Austenitic, for Pressure and High Temperature Parts A966/A966M-08(2012)Standard Practice for Magnetic Particle Examination of Steel Forgings UsingAlternating Current A967/A967M-13 Standard Specificationfor Chemical Passivation Treatments for Stainless Steel Parts

A968/A968M-96(2009) StandardSpecification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars andShapes for Corrosion and Heat-Resisting Service

A970/A970M-13 Standard Specificationfor Headed Steel Bars for Concrete Reinforcement

A971/A971M-10 Standard Test Methodfor Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils A972/A972M-00(2010)Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

A973/A973M-07(2012) StandardSpecification for Grade 100 Alloy Steel Chain

A974-97(2011) Standard Specificationfor Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated orPolyvinyl Chloride (PVC) Coated)

A975-11 Standard Specification forDouble–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-CoatedSteel Wire or Metallic-Coated Steel WireWith Poly(Vinyl Chloride) (PVC) Coating)

A976-03(2008) Standard Classificationof Insulating Coatings by Composition, Relative Insulating Ability andApplication A977/A977M-07 Standard Test Methodfor Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs

A978/A978M-08 Standard Specificationfor Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for GravityFlow Sanitary Sewers, Storm Sewers, andOther Special Applications

A979/A979M-03(2009) StandardSpecification for Concrete Pavements and Linings Installed in Corrugated SteelStructures in the Field

A980/A980M-11 Standard Specificationfor Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

A981/A981M-11 Standard Test Methodfor Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter SteelPrestressing Strand, Grade 270 [1860], Uncoated,Used in Prestressed Ground Anchors

A982/A982M-10 Standard Specificationfor Steel Forgings, Stainless, for Compressor and Turbine Airfoils

A983/A983M-06(2011) StandardSpecification for Continuous Grain Flow Forged Carbon and Alloy SteelCrankshafts for Medium Speed Diesel Engines

A984/A984M-03(2009) StandardSpecification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded A985/A985M-13Standard Specification for Steel Investment Castings General Requirements, forPressure-Containing Parts

A986/A986M-01(2011) StandardSpecification for Magnetic Particle Examination of Continuous Grain FlowCrankshaft Forgings A987/A987M-09 Standard Practice forMeasuring Shape Characteristics of Tin Mill Products

A988/A988M-11 Standard Specificationfor Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, andParts for High Temperature Service

A989/A989M-11 Standard Specificationfor Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Partsfor High Temperature Service

A990/A990M-11e01 StandardSpecification for Castings, Iron-Nickel-Chromium and Nickel Alloys, SpeciallyControlled for Pressure Retaining Parts forCorrosive Service

A991/A991M-10 Standard Test Methodfor Conducting Temperature Uniformity Surveys of Furnaces Used to Heat TreatSteel Products

A992/A992M-11 Standard Specificationfor Structural Steel Shapes

A992/A992M-SP-11 Especificación Normalizadapara Perfiles de Acero Estructural

A994-12 Standard Guide for EditorialProcedures and Form of Product Specifications for Steel, Stainless Steel, andRelated Alloys

A995/A995M-12a Standard Specificationfor Castings, Austenitic-Ferritic (Duplex) Stainless Steel, forPressure-Containing Parts

A996/A996M-09b Standard Specificationfor Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement A997-08(2012) StandardPractice for Investment Castings, Surface Acceptance Standards, VisualExamination

A998/A998M-12 Standard Practice forStructural Design of Reinforcements for Fittings in Factory–Made CorrugatedSteel Pipe for Sewers and Other Applications

A999/A999M-13 Standard Specificationfor General Requirements for Alloy and Stainless Steel Pipe A1000/A1000M-11Standard Specification for Steel Wire, Carbon and Alloy Specialty SpringQuality A1001-01(2010) Standard Specificationfor High Strength Steel Castings in Heavy Sections

A1002-10 Standard Specification forCastings, Nickel-Aluminum Ordered Alloy

A1003/A1003M-13a StandardSpecification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated forCold-Formed Framing Members

A1004/A1004M-99(2009) Standard Practicefor Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic,Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as ColdFormed Framing Members A1005/A1005M-00(2010) StandardSpecification for Steel Line Pipe, Black, Plain End, Longitudinal and HelicalSeam, Double Submerged-Arc Welded

A1006/A1006M-00(2010) StandardSpecification for Steel Line Pipe, Black, Plain End, Laser Beam Welded A1007-07 StandardSpecification for Carbon Steel Wire for Wire Rope

A1008/A1008M-12a StandardSpecification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy, High- Strength Low-Alloy with ImprovedFormability, Solution Hardened, and Bake Hardenable

A1009-05(2010) Standard Specificationfor Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformerand Filter Inductor Applications

A1010/A1010M-01(2009) StandardSpecification for Higher-Strength Martensitic Stainless Steel Plate, Sheet ,and Strip A1011/A1011M-12b StandardSpecification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,High-Strength Low-Alloy, High-Strength Low-Alloy with ImprovedFormability, and Ultra-High Strength

A1012-10 Standard Specification forSeamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser andHeat Exchanger Tubes With Integral Fins

A1013-00(2013)e1 Standard Test Methodfor High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at ControlledTemperatures Using the Voltmeter-Ammeter-Wattmeter Method

A1014/A1014M-10 StandardSpecification for Precipitation-Hardening Bolting (UNS N07718) for HighTemperature Service A1015-01(2009) Standard Guide forVideoborescoping of Tubular Products for Sanitary Applications

A1016/A1016M-13 StandardSpecification for General Requirements for Ferritic Alloy Steel, AusteniticAlloy Steel, and Stainless Steel Tubes

A1017/A1017M-11 StandardSpecification for Pressure Vessel Plates, Alloy Steel,Chromium-Molybdenum-Tungsten A1018/A1018M-10 StandardSpecification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled,Carbon, Commercial, Drawing, Structural, High-StrengthLow-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-HighStrength A1020/A1020M-02(2012) StandardSpecification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, forBoiler, Superheater, Heat Exchanger andCondenser Applications

A1021/A1021M-05(2010) StandardSpecification for Martensitic Stainless Steel Forgings and Forging Stock forHigh- Temperature Service

A1022/A1022M-13 StandardSpecification for Deformed and Plain Stainless Steel Wire and Welded Wire forConcrete Reinforcement

A1023/A1023M-09e1 StandardSpecification for Stranded Carbon Steel Wire Ropes for General Purposes A1024/A1024M-02(2012)Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless A1025/A1025M-10Standard Specification for Ferroalloys, General Requirements

A1028-03(2009) Standard Specificationfor Stainless Steel Bars for Compressor and Turbine Airfoils A1030/A1030M-11Standard Practice for Measuring Flatness Characteristics of Steel SheetProducts

A1031/A1031M-12 StandardSpecification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, DrawingSteel and Structural Steel, Hot-Rolled

A1032-04(2010) Standard Test Methodfor Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for PrestressingConcrete Pipe

A1033-10 Standard Practice forQuantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-AlloySteel Phase Transformations

A1034/A1034M-10a Standard TestMethods for Testing Mechanical Splices for Steel Reinforcing Bars

A1035/A1035M-13 StandardSpecification for Deformed and Plain, Low-carbon, Chromium, Steel Bars forConcrete Reinforcement

A1036-04(2009) Standard Guide forMeasuring Power Frequency Magnetic Properties of Flat-Rolled Electrical SteelsUsing Small Single Sheet Testers

A1037/A1037M-05(2012) StandardSpecification for Steel Line Pipe, Black, Furnace-Butt-Welded

A1038-10a Standard Test Method forPortable Hardness Testing by the Ultrasonic Contact Impedance Method A1039/A1039M-13Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial,Structural, and High-Strength Low-Alloy, Produced by Twin-RollCasting Process

A1040-10 Standard Guide forSpecifying Harmonized Standard Grade Compositions for Wrought Carbon,Low-Alloy, and Alloy Steels

A1042/A1042M-04(2009) StandardSpecification for Composite Corrugated Steel Pipe for Sewers and Drains A1043/A1043M-05(2009)Standard Specification for Structural Steel with Low Yield to Tensile Ratio forUse in Buildings A1044/A1044M-05(2010) StandardSpecification for Steel Stud Assemblies for Shear Reinforcement of Concrete A1045-10 StandardSpecification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used inConnection of Vitreous China Plumbing Fixtures to SanitaryDrainage Systems

A1046/A1046M-10ae1 StandardSpecification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by theHot-Dip Process A1047/A1047M-05(2009) Standard TestMethod for Pneumatic Leak Testing of Tubing

A1048/A1048M-06(2011) StandardSpecification for Pressure Vessel Forgings, Alloy Steel, Higher StrengthChromium- Molybdenum-Tungsten for ElevatedTemperature Service

A1049/A1049M-10 StandardSpecification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), forPressure Vessels and Related Components

A1053/A1053M-12 StandardSpecification for Welded Ferritic-Martensitic Stainless Steel Pipe A1054-07 StandardSpecificati on for Sintered CeramicFerrite Permanent Magnets A1055/A1055M-10e1 StandardSpecification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

A1056-12 Standard Specification forCast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings A1057/A1057M-08Standard Specification for Steel, Structural Tubing, Cold Formed, Welded,Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

A1058-12b Standard Test Methods forMechanical Testing of Steel Products—Metric

A1059/A1059M-08(2013) StandardSpecification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on SteelFasteners, Hardware, and Other Products

A1060/A1060M-11e1 StandardSpecification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement,Plain and Deformed, for Concrete

A1061/A1061M-09 Standard Test Methodsfor Testing Multi-Wire Steel Strand A1062-10 Standard Specification forSteel Castings Sampling

A1063/A1063M-11a StandardSpecification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by theHot-Dip Process A1064/A1064M-12 Standard Specificationfor Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1065/A1065M-09 StandardSpecification for Cold-Formed Electric-Fusion (Arc) Welded High-StrengthLow–Alloy Structural Tubing in Shapes, with 50 ksi [345MPa] Minimum Yield Point

A1066/A1066M-11 StandardSpecification for High-Strength Low-Alloy Structural Steel Plate Produced byThermo-Mechanical Controlled Process (TMCP)

A1067/A1067M-12a StandardSpecification for Test Coupons for Steel Castings

A1068-10 Standard Practice forLife-Cycle Cost Analysis of Corrosion Protection Systems on Iron and SteelProducts A1069/A1069M-11 StandardSpecification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

A1071/A1071M-11 Standard Test Methodfor Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys A1072/A1072M-11Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron andSteel Products A1073/A1073M-12 Standard Practice forUsing Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic- Coated Steel Sheet

A1074-11 Standard Specification forHot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals A1075-12 StandardSpecification for Flanged Steel U-Channel Posts

A1076/A1076M-12 StandardSpecification for Cold Formed Carbon Structural Steel Tubing Made from MetallicPrecoated Sheet Steel

A1077/A1077M-12 StandardSpecification for Structural Steel with Improved Yield Strength at HighTemperature for Use in Buildings

A1078/A1078M-12 StandardSpecification for Epoxy-Coated Steel Dowels for Concrete Pavement

A1079-13 Standard Specification forSteel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP),Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by theHot-Dip Process

A1080-12 Standard Practice for HotIsostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings A1081/A1081M-12Standard Test Method for Evaluating Bond of Seven-Wire Steel PrestressingStrand

A1082/A1082M-12 StandardSpecification for High Strength Precipitation Hardening and Duplex StainlessSteel Bolting for Special Purpose Applications

A1083/A1083M-12 StandardSpecification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-StrengthLow-Alloy, Producedby Twin-RollCasting Process

A1085-13 Standard Specification forCold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

這種方式的分享對網站於Google搜尋才有意義，敬請大家多比照辦哩，謝謝大家，得之網站當有所回櫃

為籌辦下次超大懸賞活動，請大家踴於評分，讓個人為大家做更多的事

xpt8600

谢谢分享，楼主辛苦了

阿谢克那·李

mechen，这东西吓人的，点击每一个相当折腾人！

mechen

阿谢克那·李 发表于 2014-1-26 16:38
mechen，这东西吓人的，点击每一个相当折腾人！

您有看到我的回信否？ABS 2014 全部标准仍無法正常解壓縮。

mechen

阿谢克那·李 发表于 2014-1-26 16:38
mechen，这东西吓人的，点击每一个相当折腾人！

多會連到ASTM

阿谢克那·李

已发邮件与您！好的！

阿谢克那·李

发您是下载后的压缩包解压的文件，然后再打包，您下载后看看是否全，毕竟好长时间了，若是无法下载解压都会留言，包括你分享的文件无法下载本人都会留言！

草地飞龙

版主辛苦了，感谢分享！
春节假期我将休假，无法给您的发帖继续评价，请谅解。

阿谢克那·李

可以链到，眼花缭乱的！