请教，RCC-M中哪一块讲的是关于F Cl S 含量测试的？

zpz327

RCC-M中哪一块讲的是关于F Cl S 含量测试方法的，谢谢！

asnt2012

RCC-M Section III
MC-4200 Control Method
- The following is added to paragraph 7.3 of the standard:
"The requirements contained in the "General Rules" of subchapter F 6423 in SECTION V of the RCC-M (restrictions regarding chlorine, fluorine and sulphur content for products used for examination of austenitic steel or nickel-base alloys) must be complied with".

RCC-M Section V
F 6423 Requirements for The Use of Products Containing Noxious Chemical Elements
3) Products used for liquid penetrant examination (penetrants and developers)
The maximum allowable content of products applied to austenitic stainless steels and nickelbase alloy surfaces shall be:
. 200 ppm for chloride plus fluoride
. 200 ppm for sulphur

zpz327

没人知道吗？欢迎之情人士发言

zpz327

知情者告知一下，谢谢啦

asnt2012

Chemical Method of Analysis Described in Annex FV

asnt2012

RCC-M Section V
Annex F V Chemical Method of Analysis for Determining Chlorine, Fluorine and Sulphur Contents

zpz327

asnt2012 发表于 2017-5-8 14:21
Chemical Method of Analysis Described in Annex FV

谢谢，你说的太对了。

zpz327

asnt2012 发表于 2017-5-8 14:19
RCC-M Section III
MC-4200 Control Method
- The following is added to paragraph 7.3 of the standard ...

谢谢，您说的非常正确，只是有点晚了，我找到了

ZZCSJV

长知识了，研究RCC-M的人也这么多！！！

zpz327

asnt2012 发表于 2017-5-8 14:19
RCC-M Section III
MC-4200 Control Method
- The following is added to paragraph 7.3 of the standard ...

太棒了，好详细