ASME焊材是否允许厂家材质证只出保证值？

tom6452

ASME焊材是否允许厂家材质证只出保证值？即是，抗拉强度≥500MPa，冲击≥30J；而不是出典型值（即具体数值）。这样是否允许？允许的话，ASME的那个章节里有说明？

lyklzy

ASME 焊材 没有质量证明书也可以验收，出处见下：

ASME BPVC. VI I I . 1 -2017  Rules for Construction of Pressure Vessels
Subsection A General Requirements
Part UG General Requirements for All Methods of Construction and All Materials
UG-9 WELDING MATERIALS
Welding materials used for production shall comply with the requirements of this Division, those of Section IX, and the applicable qualified welding procedure specification. When the welding materials comply with one of the specifications in Section II, Part C, the marking or tagging of the material, containers, or packages as required by the applicable Section II specification may be accepted for identification in lieu of a Test Report or a Certificate of Compliance. When the welding materials do not comply with one of the specifications of Section II, the marking or tagging shall be identifiable with the welding materials set forth in the welding procedure specification, and may be accepted in lieu of a Test Report or a Certificate of Compliance.

qilupzh

感谢资料和经验的分享，向大家学习。

tom6452

lyklzy 发表于 2018-4-3 12:32
ASME 焊材 没有质量证明书也可以验收，出处见下：

ASME BPVC. VI I I . 1 -2017  Rules for Constructio ...

原来如此，非常感谢！学习了！

littlelionma

其实典型值是个理论值，不是每批次具体的值。

lhwzww

感谢资料和经验的分享，向大家学习

wx_soLedOL1

感谢资料和经验的分享，向大家学习。
-

BodyGeGe

感谢资料和经验的分享，向大家学习。

stoneZhhf

就是EN10204 2.2证书模式