EN 3.2证书出具的资料条件是什么

lw6688

EN10204-3.2的签发机构必须是欧盟授权机构。经过对工厂的买家所购的产品类型进行相关测试后，以第三方的身份向工厂的买家声名检验结果与订单相符合。
证书上同样必须体现客户名称和生产工厂名称。
EN10204-3.2证书是向客户证明其产品符合欧洲材料规范的有效证书，一般对于出口的大型设备、压力设备等产品，都需要其原材料供应商提供EN10204-3.2证书，来证明设备上所采用的原材料是符合欧洲规范的。EN10204证书适用于任何金属材料，比如钢材、焊接件等产品。

yongwang

这个回答还是没有依据， 仅仅是个普通的介绍， 依据是什么呢？ 那里有说法？

stoneZhhf

yongwang 发表于 2020-7-1 08:35
4.2 Inspection certificate 3.2 “type 3.2 ”
Document prepared by both the manufacturer ’s authori ...

EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification

stoneZhhf

5.2 Inspectors
If the pressure equipment manufacturer chooses not to carry out direct inspections himself he shall appoint:
— a body which has been subject to appropriate accreditation. The accreditation body shall be authorized to
grant accreditation by a EU Member State; or
— a notified body as required by Article 12 of the PED; or
— a user inspectorate, where applicable.
NOTE A list of notified bodies (NANDO-List) can be found on the internet [3].

stoneZhhf

EN 764-3 Pressure equipment - Part 3: Definition of parties involved

stoneZhhf

2.1
material manufacturer
individual or organisation that produces material in the basic product forms used in the manufacture of pressure
equipment
2.2
material supplier
individual or organisation, that may or may not be the material manufacturer, who supplies material or parts used in
the manufacture of pressure equipment and assemblies
2.3
manufacturer
individual or organisation that is responsible for the design, fabrication, testing, inspection, installation of pressure
equipment and assemblies where relevant
NOTE 1 The manufacturer can subcontract one or more of the above mentioned tasks under its responsibility.
NOTE 2 In EU member states the manufacturer is responsible for compliance with the Pressure Equipment Directive
97/23/EC. For those manufacturers outside of the EU their authorized representative inside the EU assumes this responsibility.
2.4
designer, fabricator and/or installer, subcontractor of the manufacturer
individual or organisation that respectively performs design, fabrication, testing, installation where relevant, of
pressure equipment under contract to the manufacturer
2.5
first party
individual or organisation that designs, manufactures or supplies the pressure equipment or the assembly
2.6
second party
individual or organisation that uses and/or operates the pressure equipment or the assembly
2.7
third party
individual or organisation independent of the first and second party
NOTE Inspectors of the suppliers of material, manufacturers, fabricators/installers or their subcontractors are not third party
inspectors.

stoneZhhf

2.10
inspector
individual who is independent from production responsible for carrying out inspections to verify that the
requirements of the technical specification(s) are met
2.11
responsible authority
competent organisation which is independent of the manufacturer. For application within the jurisdiction of the
European Union this organisation may be a notified body, a recognised third-party organisation or an user
inspectorate. For application outside the jurisdiction of the European Union this organisation may be a government
regulating body or an independent inspection authority. For the purpose of this standard all these organisations
have been collectively termed responsible authority (RA)
2.12
notified body
organisation according to the Article 12 of the Pressure Equipment Directive 97/23/EC
NOTE The names and tasks of the notified bodies are published in the Official Journal of the European Communities.
2.13
recognized third-party organization
organisation according to the Article 13 of the Pressure Equipment Directive 97/23/EC
NOTE The names and tasks of the recognised third-party organisations are published in the Official Journal of the
European Communities.
2.14
user inspectorate
organisation according to the Article 14 of the Pressure Equipment Directive 97/23/EC
A user inspectorate acts exclusively for the group of which it is part. The names and tasks of the user inspectorate
are not published in the Official Journal of the European Communities. The designation of an user inspectorate is
optional for the Member States.

stoneZhhf

DIN EN 10216-2:2014-03
Seamless steel tubes for pressure purposes –
Technical delivery conditions –
Part 2: Non-alloy and alloy steel tubes with specified elevated
temperature properties;
English version EN 10216-2:2013,
English translation of DIN EN 10216-2:2014-03

stoneZhhf

9.2.1 Types of inspection documents
Unless option 13 is specified, an inspection certificate 3.1, in accordance with EN 10204, shall be issued.
Option 13: The inspection certificate 3.2 in accordance with EN 10204 shall be issued.
If an inspection certificate 3.2 is specified, the purchaser shall notify the manufacturer of the name and address
of the organization or person who is to carry out the inspection and produce the inspection document.
In the case of the inspection certificate 3.2, it shall be agreed which party shall issue the certificate.
Document 3.1 and 3.2 are to be validated by the manufacturer's authorized representative.

stoneZhhf

AD 2000 W4 02-2008