设为首页收藏本站积分充值论坛守则开通VIP升级攻略

阿斯米网

简单一步 , 微信登陆

手机短信,快捷登录

只需一步,快速开始

搜索
总共48248条微博

论坛承接ASME相关业务 2023年最新国外标准中译本价格目录 关于ASME BPVC 2023版预定优惠折扣的通知
ASME 2023版中文翻译众筹中 广告位招租[50米粒/天] [ASME BPVC 2023版征订单下载]
1220查看 | 9回复

[求助] 求德国压力容器标准VGB-S 109

[复制链接]
累计签到:1106 天
连续签到:2 天
发表于 2020-5-15 10:48:14 | 显示全部楼层 |阅读模式
德国压力容器标准VGB-S 109,
小众,目前,欧标的锅炉项目渐多,希望坛子里能互帮互助,多一些德标欧标
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:21:56 | 显示全部楼层
Option 6 of EN 10216-2 - tensile test at an increased temperature - is binding. A hot
tensile test shall be carried out at the max. temperature of the hot yield strength for
tubes with a wall thickness T ≥ 16 mm listed in EN 10216-2. The test is preferably
carried out on transverse specimens. Round specimens are given preference to flat
specimens
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:22:25 | 显示全部楼层
Specific Requirements for X10CrMoVNb9-1
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:22:45 | 显示全部楼层
Deviating from the delivery standards the scope of analysis for Al is ≤ 0.03 % and for a wall
thickness > 50 mm S ≤ 0,006 %. The analysis content of nitrogen shall be between 0.04 and
0.06 %. The analysis content of Cu is limited to max. 0.3 % and shall be shown on the test
certificate.
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:23:07 | 显示全部楼层
The normalising temperature for tubes shall be at least 1,050 °C.
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:23:25 | 显示全部楼层
UT test for longitudinal imperfections according to EN 10246-7. Eligibility class U2, subclass C.
According to Table B1 of Appendix B, for tubes with an outside diameter/wall thickness ratio <
5 but ≥ 4 the depth of the internal groove compared to the depth of the external groove is
(normatively) enlarged
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:24:09 | 显示全部楼层
The ultrasonic inspection of the wall thickness according to EN 10246-13 shall be performed
for all pipes D > 142 mm, if these are used within the creeping range. Furthermore, the
ultrasonic inspection of the wall thickness shall be carried out within a measuring grid 4 times
at the circumference (offset by 90°) at least every 1,000 mm over the length of the pipe for all
pipes. The measured values shall be documented retraceably with reference to the zero line.
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:24:28 | 显示全部楼层
The country of origin of the material manufacture shall be shown on the inspection
certificate
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:24:54 | 显示全部楼层
For material listed in Section 13 of VGB-S-109-00-2012-08-DE-EN, an inspection certificate 3.2
shall be issued according to EN 10204, for all tests.
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

累计签到:1106 天
连续签到:2 天
 楼主| 发表于 2020-5-22 11:25:45 | 显示全部楼层
Deviating from delivery standards a notched bar impact work of at least 41/68 J (transverse/
longitudinal orientation of specimen) is required
"小礼物走一走,来ASME论坛支持我"
还没有人打赏,支持一下
回复 支持 反对

使用道具 举报

请登陆网站
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

服务热线

400-8888888

周一至周日:9:00-21:00

快速回复 返回顶部 返回列表